Electrolux LAVAMAT 50810 manual Installing the appliance, Transporting the appliance

Page 26

Installing the appliance

Transporting the appliance

1 Warning: The washing machine is very heavy. There is a risk of injury. Exercise care when lifting the appliance.

Do not lay the washing machine on its front nor on its right side (as seen from the front). Electrical components may get wet.

Never transport the appliance without using the transit packaging. Only remove the transit packaging when the appliance is in its place of installation. Transporting the appliance without the use of the transit packaging can cause damage to the appliance.

Never lift the appliance by the door when it is open nor by the plinth.

When using a sack trolley to transport the washing machine:

Only use the sack trolley on the side of the appliance.

Removing the transit packaging

Important! Be sure to remove all the components of the transit pack- aging prior to using the appliance for the first time. Keep the transit packaging in a safe place, in case it is needed at a later date when the appliance is to be moved

(e.g. moving house).

1. Open the two hose retainers located at the rear of the appliance and re- move the hoses and electrical cable.

2.Remove the two hose retainers from

the appliance with a strong tug.

26

Image 26
Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationChild safety SafetyPrior to using the appliance for the first time Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardDescription of the appliance Control panelProgramme overview Drain SpinApplication/Features Care Symbols1 Preparing washing Before the first washPreparing and sorting washing Sorting washingAdding detergent/conditioner Running a wash cycleOpening the door/loading washing Open the door pull the handle on the doorWashing powder/tablets for the main wash cycle Switching on the appliance/selecting a programmeIf you are using liquid detergent Shortened wash programme for lightly soiled washing Changing the spin speed/selecting rinse holdProgramme Option Buttons Activating RINSE+ Setting the delay timerActivating/deactivating RINSE+ Deactivating RINSE+Washing cycle complete/Removing the washing Starting a programmeInterrupting a programme/adding washing Interrupting a programmeIf Rinse Hold has been selected Child safety deviceDeactivating the child safety device Washing drum Cleaning and careDetergent drawer Door and rubber collarRemedying small faults yourself What to do ifOnly a few large items Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washingWhen the water has all drained away Carrying out an emergency drainDrain pump Old appliance DisposalPackaging material Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inTransporting the appliance Installing the applianceWhen using a sack trolley to transport the washing machine Removing the transit packagingWhere to install Making the appliance level If the appliance is to stand on a baseBrown Live Wire coloured green and yellow Electrical ConnectionPermitted water pressure Connecting the appliance to the water supplyPermanent Connection Water inlet 35m long pressure hose is supplied with the applianceFor drainage into an outlet From your Service Force CentreWater Drainage Pumping heights of over 1 metre Warranty conditions Great BritainFor general enquiries concerning 0870 5 929Customer Care Major AppliancesAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG