Electrolux LAVAMAT 50810 manual General safety, Resulting overheating may constitute a fire hazard

Page 6

General safety

•Repairs to the washing machine may only be carried out by qualified/ authorised service engineers.

•Never use the appliance when the electrical cable is damaged or the control panel, worktop or plinth area are damaged to such an extent that the inside of the appliance is openly accessible.

•Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug from the power point or – if the appliance has been hard-wired – switch off the cut- out in the fuse box or completely remove the fuse.

•If operation is stopped, disconnect the appliance from the mains sup- ply and turn off the tap.

•Never remove the power plug from the power point by pulling on the cable. Always pull the plug.

•Multiway-plugs, connectors and extension cables must not be used.

Resulting overheating may constitute a fire hazard.

•Never wash the washing machine down with a water jet. Danger of electric shock.

•When using wash programmes with high temperatures the glass in the door will become hot. Do not touch it!

•Before emergency emptying of the appliance, before cleaning the drain pump or opening the door in an emergency, let the water cool down.

•Small animals can nibble on electrical cables and water hoses. This can constitute a risk of electrocution and water damage. Keep small animals away from the washing machine.

6

Image 6

Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationChild safety SafetyPrior to using the appliance for the first time Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardDescription of the appliance Control panelProgramme overview Drain SpinApplication/Features Care Symbols1 Preparing washing Before the first washPreparing and sorting washing Sorting washingAdding detergent/conditioner Running a wash cycleOpening the door/loading washing Open the door pull the handle on the doorSwitching on the appliance/selecting a programme If you are using liquid detergentWashing powder/tablets for the main wash cycle Changing the spin speed/selecting rinse hold Programme Option ButtonsShortened wash programme for lightly soiled washing Activating RINSE+ Setting the delay timerActivating/deactivating RINSE+ Deactivating RINSE+Washing cycle complete/Removing the washing Starting a programmeInterrupting a programme/adding washing Interrupting a programmeChild safety device Deactivating the child safety deviceIf Rinse Hold has been selected Washing drum Cleaning and careDetergent drawer Door and rubber collarRemedying small faults yourself What to do ifOnly a few large items Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washingWhen the water has all drained away Carrying out an emergency drainDrain pump Disposal Packaging materialOld appliance Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inTransporting the appliance Installing the applianceWhen using a sack trolley to transport the washing machine Removing the transit packagingWhere to install Making the appliance level If the appliance is to stand on a baseBrown Live Wire coloured green and yellow Electrical ConnectionConnecting the appliance to the water supply Permanent ConnectionPermitted water pressure Water inlet 35m long pressure hose is supplied with the applianceFrom your Service Force Centre Water DrainageFor drainage into an outlet Pumping heights of over 1 metre Warranty conditions Great BritainFor general enquiries concerning 0870 5 929Customer Care Major AppliancesAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG