Electrolux LAVAMAT 50810 manual Water inlet, 35m long pressure hose is supplied with the appliance

Page 31

Water inlet

A 1.35m long pressure hose is supplied with the appliance.

If a longer inlet hose is required, only hoses from the manufacturer are to be used. Your local Service Force stocks hose kits of different lengths.

3 Sealing rings are either inserted in the plastic nuts of the threaded hose fitting or are included as spare parts. Do not use any other sealing rings.

Important! All threaded hose fit- tings must only be tightened by hand.

1.Connect the hose with the right-an-

gle connector to the machine.

Important! Do not position the inlet hose vertically downwards. Position it to the right or the left as shown in the illustration.

2.Connect the hose with the straight

connector to a water tap with an R ¾ (inch) screw thread.

3. Slowly turn on the tap and check that all connections are watertight.

Image 31

Contents Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsFollow the Installation and connection instructions SafetyPrior to using the appliance for the first time Child safetyResulting overheating may constitute a fire hazard General safetyControl panel Description of the applianceDrain Spin Programme overviewApplication/Features Care Symbols1 Sorting washing Before the first washPreparing and sorting washing Preparing washingOpen the door pull the handle on the door Running a wash cycleOpening the door/loading washing Adding detergent/conditionerIf you are using liquid detergent Switching on the appliance/selecting a programmeWashing powder/tablets for the main wash cycle Programme Option Buttons Changing the spin speed/selecting rinse holdShortened wash programme for lightly soiled washing Deactivating RINSE+ Setting the delay timerActivating/deactivating RINSE+ Activating RINSE+Interrupting a programme Starting a programmeInterrupting a programme/adding washing Washing cycle complete/Removing the washingDeactivating the child safety device Child safety deviceIf Rinse Hold has been selected Door and rubber collar Cleaning and careDetergent drawer Washing drumWhat to do if Remedying small faults yourselfOnly a few large items There are white residues on the washing If the wash result is not satisfactoryThere are grey stains on the washing Foam can still be seen following the final rinseCarrying out an emergency drain When the water has all drained awayDrain pump Packaging material DisposalOld appliance Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationRemoving the transit packaging Installing the applianceWhen using a sack trolley to transport the washing machine Transporting the applianceWhere to install If the appliance is to stand on a base Making the appliance levelElectrical Connection Brown Live Wire coloured green and yellowPermanent Connection Connecting the appliance to the water supplyPermitted water pressure 35m long pressure hose is supplied with the appliance Water inletWater Drainage From your Service Force CentreFor drainage into an outlet Pumping heights of over 1 metre Great Britain Warranty conditionsMajor Appliances 0870 5 929Customer Care For general enquiries concerningAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG