Electrolux L 12720 VIT Cancelling a programme, Altering an option/programme which is running

Page 16

Description of the appliance

Cancelling a programme

To cancel a programme which is running, turn the programme selector dial to the RESET position (H).

Warning! After a programme which ends with water in the drum

(RINSE HOLD option), turn the selector dial first to RESET (H) and then to the DRAIN (D) or SPIN (F) programme.

Altering an option/programme which is running

To alter an option, first set the machine to PAUSE by pressing the START/PAUSE button.

Any option can be modified before the machine starts it. After select-

ing the new option press the START/PAUSE button again to re- start the selected programme.

To modify the selected programme turn the programme selector dial to RESET (H) and then choose a new programme.

After pressing the START/PAUSE button again, the machine restarts with the newly selected programme and the water is not emp- tied out.

Opening the door after the programme has started

You can open the door, after having set the machine to PAUSE, provided the following conditions exist:

the machine is not in the heating or drying phase beyond 55°C;

the level of the water is not high;

the drum is not turning.

If these requirements are met, when you pause the machine the door can be opened.

Should it not be possible to open the door, and should it be absolutely nec- essary to do so, switch the machine off by pressing the ON/OFF button.

After approximately 3 minutes, you can open the door.

Pay attention to the level and temperature of the water in the machine!

When you close the door and press the ON/OFF and START/PAUSE buttons again, the washing machine will resume the programme from the point where it had been interrupted.

16

Image 16
Contents Lavamat Turbo L 12720 VIT Dear customer Contents Programme charts wash and special programmes Contents Technical data Service Safety instructions General safetyPositioning, connection, starting up Follow the instructions for positioning and connectionChild safety Proper useDisposal Tips for environmental protectionPackaging materials MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialDelay Start button ON/OFF buttonMains-on light START/PAUSE buttonDrying Time button Programme Option buttonsRinse Hold Display Programme progress displayAltering an option/programme which is running Cancelling a programmeOpening the door after the programme has started Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundrySort of laundry Approximate Dry weights Types of fabric and care labelsCotton SyntheticsDelicates 40 Woollens and particularly delicate itemsDetergents and additives Preparing the drying cycle LoadGarments not suitable for drying Sort of laundryDuration of the drying cycle Drying symbols on garment labelsFibre residue Additional drying How to wash Switching the machine onLoad the laundry Add detergent and additiveSelection of the Delay Start option Selection of the Extra Rinse optionStarting the programme At the end of the programme How to dryDrying only Automatic washing and drying NON-STOP programmeWash programmes Programme chart60E Type Special programmesMax Consumption Laundry Drying 1200Degree of drying Consumption data for dryingMax Water Energy Duration Load Litres Cleaning and maintenance Periodical cleaning ExteriorAfter each wash Detergent dispenser drawerDrain filter Door sealWater inlet filter Frost precautions Emergency emptying outProblem Possible cause Solution TroubleshootingSomething not working? Problem Possible cause SolutionNoisy Feet have not been E10 Problem Possible causeE20 Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService 914601208Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Rear viewInstallation UnpackingPositioning LevellingWater inlet Water drainagePermanent connection Electrical connectionConnect the machine to an earthed socket Preparation and assembly of the door Building-inDoor HingesMounting the door Counter-magnet132.986.960-01-0305