How to wash
Starting the programme
1.Check that the water tap is open.
2.Press START/PAUSE to start the programme.
If the Delay Start option has been selected the programme will start at the end of the countdown.
At the start of the programme, if the “END” light blinks for few seconds, the acoustic signals sounds and on the display appears E40, that indi- cates that the door is open. Close the door and press the START/PAUSE button again.
If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this peri- od it is possible to load other laundry or cancel the delay time.
•Load other laundry: press the START/PAUSE button. Open the door. Load the laundry. Close the door and press the START/PAUSE button again.
•Cancel the delay time: press the START/PAUSE button. Press the DELAY START button until on the display appears 0’, if you wish to cancel it. Press the START/ PAUSE button again to let the programme restart.
Programme progress display
By selecting the wash programme, the pilot lights correspond- ing to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on.
Display
The time to the end of the programme decreases minute by minute and appears on the display.
27