Electrolux L 12720 VIT manual Positioning, Levelling

Page 47

Installation

Set the machine

upright and remove the two remaining bolts

from the back.

Pull out the three

plastic spacers from the holes into which the bolts were fitted.

Plug the open holes with the plugs supplied with the instruction booklet. You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is not impeded by carpets, rugs etc.

•Before placing it on small tiles, apply a rubber coating.

•Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.

•If it is impossible to avoid positioning the machine next to a gas cooker or coal-burning stove, an insulating panel (85x57 cm) covered with aluminium foil on the side facing the cooker or stove, must be inserted between the two appliances;

•The machine must not be installed in rooms where the temperature can drop below 0.

•The water inlet hose and the drain hose must not be kinked.

•Please ensure that when the appliance is installed, it is easily accessi- ble for the engineer in the event of a breakdown.

Levelling

Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under

the machine to compensate for any unevenness in the floor.

47

Image 47

Contents Lavamat Turbo L 12720 VIT Dear customer Contents Programme charts wash and special programmes Contents Technical data Service Follow the instructions for positioning and connection Safety instructionsGeneral safety Positioning, connection, starting upProper use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelSTART/PAUSE button Delay Start buttonON/OFF button Mains-on lightProgramme Option buttons Drying Time buttonRinse Hold Programme progress display DisplayOpening the door after the programme has started Cancelling a programmeAltering an option/programme which is running Before the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleSynthetics Sort of laundry Approximate Dry weightsTypes of fabric and care labels CottonWoollens and particularly delicate items Delicates 40Detergents and additives Sort of laundry Preparing the drying cycleLoad Garments not suitable for dryingFibre residue Drying symbols on garment labelsDuration of the drying cycle Additional drying Add detergent and additive How to washSwitching the machine on Load the laundrySelection of the Extra Rinse option Selection of the Delay Start optionStarting the programme Drying only How to dryAt the end of the programme NON-STOP programme Automatic washing and drying60E Programme chartWash programmes Max Consumption Laundry Special programmesType 1200 DryingMax Water Energy Duration Load Litres Consumption data for dryingDegree of drying Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each washWater inlet filter Door sealDrain filter Emergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Possible cause Solution Possible cause Solution ProblemNoisy Feet have not been E20 Problem Possible causeE10 White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical data914601208 ServiceSafety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewUnpacking InstallationLevelling PositioningWater drainage Water inletConnect the machine to an earthed socket Electrical connectionPermanent connection Hinges Preparation and assembly of the doorBuilding-in DoorCounter-magnet Mounting the door132.986.960-01-0305