No spin 
option eliminates all the spin phases and increases the number of rinses for cottons, synthetics, deli- cates and silk.
Rinse Hold 
: by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished the display shows the icon of the selected programme and the message «Finished», while on the right of the display the end cycle and the current time appear. The buzzer sounds a short jingle, the Start/Pausa light is off and the door is locked to indicate that the water must be emptied out.
To empty out the water:
●select the 
(Drain), 
(Spin) or 
(Delicate spin) programme
●reduce the spin speed if needed, by means of the relevant button
●depress Start/Pause button
●at the end of the programme, on the
display is shown the 
(Door) icon and the «Door Unlocked» message. The door can be opened.
Night Cycle 
: by selecting this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry.
As all spinning phases are suppressed, this washing cycle is very noiseless and it can be selectionned at night or in times with a more economical power rate. On cotton, synthetics, delicates and silk programmes the rinses will be performed with more water.
use electrolux 15
When the programme has finished the display shows the icon of the selected programme, below the icon of the selected programme and the message «Finished», while on the right of the display the end cycle and the current time appear. The Start/Pause light is off and the door is locked to indicate that the water must be emptied out.
To empty out the water, please read the previous option steps.
Select the options
|
|
| 2:00 | Time |
|
|
|
| |
60 | 1400 |
| 20:33 | manager |
|
| |||
|
|
| ||
Temp. | Spin | Option | Ok |
|
|
|
|
| Start/ |
|
|
|
| Pause |
Depending on the selected programme only certain options are available and shown during the selection phase.
Note: Not all the options are compatible between themselves. The uncompatible option icons will disappear.
The required options must be selected after having choosen the desired programme and before depressing the Start/Pause button.
By pressing the Option 
buttons, you can activate the options menu. Using Up 
or Down 
button you can move through all the available options.
The display will show, using all the visible area, the selected option in highlighted mode. The corresponding icon will appear on the right side of the display and just below it, a short message describes the status of the option (Off or On).