20electrolux use
Fabric |
|
| Soil Level |
|
| |||
Cottons |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| 95°C | X | X | X | X | X | X | |
60/50°C | X | X | X | X | X | X | ||
| 40°C | X | X | X | X | X | X | |
| 30°C | X | X | X | X | X | X | |
|
| (cold) | X | X | X | X | X | X |
Synthetics |
|
|
|
|
|
| ||
60/50°C |
| X | X | X |
| X | ||
| 40°C |
| X | X | X |
| X | |
| 30°C |
| X | X | X |
| X | |
|
| (cold) |
| X | X | X |
| X |
Delicates |
|
|
|
|
|
| ||
| 40°C |
| X | X | X |
| X | |
| 30°C |
| X | X | X |
| X | |
|
| (cold) |
| X | X | X |
| X |
Select the Start/Pause
|
|
| 02:00 | Time |
|
|
|
| |
| Filling |
| 20:33 | manager |
|
|
| ||
Temp. | Spin | Option | Ok |
|
|
|
|
| Start/ |
|
|
|
| Pause |
To start the selected programme, press the Start/Pause button; the green pilot light stops flashing.
On the display will appear the icon, and alternatively the name and the running phase of the selected programme to indicate that the appliance starts operating and the door is locked.
To interrupt a programme which is running, depress the Start/Pause button: the green pilot light starts to flash and the icon and the current phase of the selected programme appears on the display to indicate that the appliance is paused.
To restart the programme from the point at which it was interrupted, press the Start/Pause button again.
If you have chosen a delayed start, the machine will begin the countdown.
Altering an option or a running programme
It is possible to change only the options vizualised on the display by
means of 
and 
buttons before the programme carries them out. Before you make any change, you must pause the washing machine by pressing the Start/Pause button.
Changing a running programme is possible only by resetting it. Turn the programme selector dial to “O” and then to the new programme position, press the Ok button to cancel the previous washing programme. The washing water in the tub will not emptied out. Start the new programme by depressing the Start/Pause button again.
Interrupting a programme
Depress the Start/Pause button to interrupt a programme which is running, the corresponding light starts to flash. Depress the button again to restart the programme.