Safety Information
In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.
General safety
●It is dangerous to alter the specifications or attempt to modify this product in any way.
●During high temperature wash programmes the door glass may get hot. Do not touch it!
●Make sure that small pets do not climb into the drum. To avoid this, please check into the drum before using.
●Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.
●Only use the advised quantities of fabric softener and detergent. Damage to the fabric can ensue if you
safety information electrolux 5
●Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.
●Do not use your washing machine to wash articles with whalebones, material without hems or torn material.
●Always unplug the appliance and turn off the water supply after use, clean and maintenance.
●Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
Installation
●This appliance is heavy. Care should be taken when moving it.
●When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.
●All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual.
●After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable.
●If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely
●Always be sure, that there is no water leakage from hoses and their connections after the installation.