Cancelling a programme
Turn the selector dial to “O” and then in the new selected programme. Press the Ok button to cancel the programme which is running.
Now press the Start/Pause button to start the new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the Start/Pause button. The corresponding message will appear on the display.
If the “door” 
icon and the message «Door unlocked» e «Finished» will appear alternately on the display, the door can be opened. If the “door” 
icon and the message «Door unlocked» will not appear on the display, this means that the machine is already heating, that the water level is above the bottom edge of the door or that the drum is turning. In this case the door can not be opened.
If you cannot open the door but you need to open it you have to switch the machine off by turning the selector dial to «O». After about 3 minutes the door can be opened (pay attention to the water level and temperature!).
use electrolux 21
At the end of the programme
The machine stops automatically.
If the Rinse Hold 
or Night Cycle 
options have been selected, the Start/Pause light goes off, the icon of the selected programme and the message «Finished» appear on the display and the door remains locked to indicate that the water must be emptied out before opening the door.
To empty out the water please read the steps on the «Rinse hold» option paragraph.
Turn the programme selector dial to “O” to switch the machine off. Remove the laundry from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.