Electrolux WA L4 E100, WA L6 E100, WA L2 E100 user manual Washing drum, Door seal, Drain pump

Page 28

28Care and cleaning

2.Remove the conditioner insert from the middle compartment.

3.Clean all parts with water.

4.Put the conditioner insert in as far as it will go, so that it is firmly in place.

5.Clean all parts of the washing ma-

chine, especially the nozzles in the top of the washing-in chamber, with a brush.

6. Insert the detergent dispenser drawer in the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron.

Important! Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or iron or steel wool.

1.Remove any rust deposits on the drum with a cleaning agent for stainless steel.

2.Run a washing cycle without any washing to clean off any cleaning agent residues. Programme: COTTONS/LINEN 95, press the TIME SAVING button, add approx. 1/4 measuring cup of detergent.

Door seal

Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold.

Drain pump

The pump should be inspected regularly and particularly if

the machine does not empty and/or spin

the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump.

Proceed as follows:

1. Disconnect the appliance.

2.If necessary wait until the water has

cooled down.

3. Open the pump door.

Image 28
Contents Wasching machine WA L2 E100 WA L4 E100 WA L6 E100 Page Welcome to the world of Electrolux Contents International wash code symbols Care and cleaning Packaging materials Old machine Ecological hints Prior to using for the first time Safety informationGeneral safety Installation UseChild Safety Keep all detergents in a safe place out of children’s reachProduct description Detergent dispenser drawerControl panel First UseAcoustic signals Child safety lockPersonalization Daily UseMeasure out the detergent and the fabric softener Select the required programmeDetergent required, pour it into the main If required, pour fabric softener intoSelect the spin speed or the rinse hold option Programme option buttonSelect the Prewash option Select the Stain optionSelect the Time Saving option DisplaySelect the Start/Pause Programme progress displayCancelling a programme Select an additional rinseAltering an option or a running programme Interrupting a programmeAt the end of the programme Washing programmes Pumpen Vidange RefreshSpin reduction Off Aus/ Arrêt White and fastProgramme information Easy IronTemperatures Preparing the wash cycleSorting out the laundry Before loading the laundryFollowing weights are indicative Laundry weightsMaximum loads Removing stains Detergents and additives Quantity of detergent to be used Degrees of water hardness Powder detergents for delicate fabrics 60C max and woollens Marked before starting the wash programmeInternational wash code symbols Energetic wash Delicate washCare and cleaning Door seal Washing drumDrain pump Care and cleaning Water inlet filter Emergency emptying outFrost precautions Possible cause/Solution Something not workingSomething not working Cause possible/Solution Techinical Data Door includedConsumption value Installation UnpackingHEC0003 HEC0023 C Water inlet Positioning and levellingConnect the hose with the angled connection to the machine Water-stop device Water drainageEnd of the drain hose can be positioned in three ways Drain hose must not be kinkedPermanent connection Electrical connectionConnect the machine to an earthed socket Enviroment concerns Packaging materialsOld machine Ecological hints8048 Zürich, Badenerstrasse 587, Tel 405 81 5506 Mägenwil, Industriestrasse 10, Tel 848Garantie Warranty GaranziaEuropean Guarantee Customer service centres Page ANC number 132 968