Electrolux WA L4 E100, WA L6 E100, WA L2 E100 user manual Frost precautions

Page 31

Care and cleaning 31

Frost precautions

If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows:

1.Close the water tap and unscrew the water inlet hose from the tap.

2.Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out.

3.Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again.

By doing this, any water remaining in the machine is removed, avoiding ice forming and consequently damage to the appliance.

When you use the machine again, make sure that the ambient temperature is above 0°C.

Important! Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme. This will activate the ECO VALVE device avoiding that part of the detergent remains unused at next washing.

Image 31
Contents Wasching machine WA L2 E100 WA L4 E100 WA L6 E100 Page Welcome to the world of Electrolux Contents International wash code symbols Care and cleaning Packaging materials Old machine Ecological hints Prior to using for the first time Safety informationGeneral safety Use InstallationKeep all detergents in a safe place out of children’s reach Child SafetyDetergent dispenser drawer Product descriptionFirst Use Control panelDaily Use Acoustic signalsChild safety lock PersonalizationIf required, pour fabric softener into Measure out the detergent and the fabric softenerSelect the required programme Detergent required, pour it into the mainProgramme option button Select the spin speed or the rinse hold optionDisplay Select the Prewash optionSelect the Stain option Select the Time Saving optionProgramme progress display Select the Start/PauseInterrupting a programme Cancelling a programmeSelect an additional rinse Altering an option or a running programmeAt the end of the programme Washing programmes Off Aus/ Arrêt White and fast Pumpen VidangeRefresh Spin reductionEasy Iron Programme informationBefore loading the laundry TemperaturesPreparing the wash cycle Sorting out the laundryFollowing weights are indicative Laundry weightsMaximum loads Detergents and additives Removing stainsMarked before starting the wash programme Quantity of detergent to be usedDegrees of water hardness Powder detergents for delicate fabrics 60C max and woollensEnergetic wash Delicate wash International wash code symbolsCare and cleaning Door seal Washing drumDrain pump Care and cleaning Emergency emptying out Water inlet filterFrost precautions Something not working Possible cause/SolutionSomething not working Cause possible/Solution Door included Techinical DataConsumption value Unpacking InstallationHEC0003 HEC0023 C Water inlet Positioning and levellingConnect the hose with the angled connection to the machine Drain hose must not be kinked Water-stop deviceWater drainage End of the drain hose can be positioned in three waysPermanent connection Electrical connectionConnect the machine to an earthed socket Ecological hints Enviroment concernsPackaging materials Old machine8048 Zürich, Badenerstrasse 587, Tel 405 81 5506 Mägenwil, Industriestrasse 10, Tel 848Garantie Garanzia WarrantyEuropean Guarantee Customer service centres Page ANC number 132 968