Electrolux LAVAMAT W 1259 manual Opening and closing the door, Loading the washing

Page 17

Operating Instructions

Opening and closing the door

0To open: pull the door by the handle.

0To close: push the door firmly shut.

When the machine is switched on, the DOOR light and the START/ PAUSE light indicate whether the door can be opened

DOOR indicator

START/PAUSE indicator

Can the door be opened?

flashes

flashes

yes, after about 2 minutes

lit

lit

no1)

is off

flashes

yes

 

 

 

1) Door is locked due to high water level or high temperature.

3

If the END light flashes 4 times and an acoustic signal is emitted 4

 

times, it means there was an attempt to start a wash programme with-

 

out closing the door properly. If this happens, push the door firmly shut

 

and start the wash programme again.

Loading the washing

3

See "Programme Tables" for maximum loads.

 

For information about the correct preparation of the washing see "Sort

and prepare washing".

01. Sort and prepare the washing according to type.

2.Open the door: Pull the handle on the door.

3.Load the washing.

Important! Do not trap washing when closing the door. The fabrics and the machine could be damaged.

4.Close the door firmly.

17

Image 17
Contents Lavamat W 1259 Electronic Dear Customer Contents What to do if Trouble ShootingPage Intended Use SafetyPrior to initial start-up General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDrawer for Detergent and Conditioners Description of the ApplianceFront view Programme selector Control PanelWOOL/SILK P Handwash Programme Option ButtonsQuick Consumption Values and Programme TimesSorting and preparing a wash load Before the First WashPreparing a Wash Load Types of Washing and Care Symbols How much detergent and conditioner? Detergent and Conditioners Which detergent and conditioner?Water softening Water hardness detailsAfter the washing programme has ended Running a washing cycleBrief instructions Loading the washing Opening and closing the doorAdding detergent/conditioners If using liquid detergents/tabletsFor the appropriate pro Setting the washing programmeDelicates Changing the spin speed / Selecting the rinse hold functionChanging the washing programme Starting the Wash ProgrammeProgramme Progress Changing the Spin Speed Washing cycle complete/removing the washingWashing Programme TablesSeparate Spinning Separate RinsingDetergent Dispenser Drawer Maintenance and CleaningTo run a maintenance wash Maintenance WashWashing Machine Drum Main doorCleaning the drain pump Operating Instructions What to do if Trouble ShootingMoved START/PAUSE Water tap is not fully Open the water tap fully If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying To cancel the additional rinse cycles When the water is completely drainedAdditional rinse cycles RINSE+ To set the additional rinse cyclesCancelling the child safety feature Child Safety FeatureSetting the child safety feature Installation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionDisposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataGreat Britain Warranty conditionsIndex Customer Care Service & Spare Parts0870 5 929 Help us to help you AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG