Electrolux LAVAMAT W 1259 manual Water tap is not fully Open the water tap fully

Page 32

Operating Instructions

	Problem	Possible cause	Remedy
		The water tap is not fully	Open the water tap fully.
	Remnants of deter-	opened.

	gent are building	The inlet hose filter in the in	Close the water tap. Unscrew
	up in the detergent
			the inlet hose from the water
	drawer.	coupling of the inlet hose at
			tap and from the machine.
		the tap is blocked.
			Clean the filter.

	The rinse water is	The cause is probably a deter-	This has no negative effects on
		gent with a high silicate con-	rinse results; use a liquid de-
	cloudy.
		tent.	tergent if necessary.

	When pressing
	a programme op-	The selected programme op-
	tion button,
		tion cannot be combined with	Make another selection.
	the corresponding
		the set programme.
	indicator does not

	light up.

32

Image 32

Contents Lavamat W 1259 Electronic Dear Customer Contents Trouble Shooting What to do ifPage Intended Use SafetyPrior to initial start-up Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDrawer for Detergent and Conditioners Description of the ApplianceFront view Control Panel Programme selectorProgramme Option Buttons WOOL/SILK P HandwashConsumption Values and Programme Times QuickSorting and preparing a wash load Before the First WashPreparing a Wash Load Types of Washing and Care Symbols Detergent and Conditioners Which detergent and conditioner? How much detergent and conditioner?Water softening Water hardness detailsAfter the washing programme has ended Running a washing cycleBrief instructions Opening and closing the door Loading the washingIf using liquid detergents/tablets Adding detergent/conditionersSetting the washing programme For the appropriate proChanging the spin speed / Selecting the rinse hold function DelicatesChanging the washing programme Starting the Wash ProgrammeProgramme Progress Washing cycle complete/removing the washing Changing the Spin SpeedProgramme Tables WashingSeparate Rinsing Separate SpinningMaintenance and Cleaning Detergent Dispenser DrawerMaintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Operating Instructions Trouble Shooting What to do ifMoved START/PAUSE Water tap is not fully Open the water tap fully If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying When the water is completely drained To cancel the additional rinse cyclesAdditional rinse cycles RINSE+ To set the additional rinse cyclesCancelling the child safety feature Child Safety FeatureSetting the child safety feature Installation and connection instructions Installation Safety PrecautionsRemove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceElectrical Connection Measures not be observedPermanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsWarranty conditions Great BritainIndex Customer Care Service & Spare Parts0870 5 929 Help us to help you AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG