Electrolux LAVAMAT W 1259 manual Are supplied with it

Page 39

Installation and connection instructions

3	The special spanner (A) and the
	caps (B) (2 each) and (C) (1 each)

are supplied with it.

3. Remove the screw D, including the compression spring with the special spanner A.

4. Cover the hole with the cap C.

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

5.Remove the two screws (E) with

the special spanner (A).

6. Remove the 4 screws (F).

7. Remove the transit bar (G).

8. Screw the 4 screws (F) back in for safe keeping.

9. Close the 2 large holes with the caps (B).

Important! When fitting the plastic caps, press until they snap into the rear panel securely.

39

Image 39

Contents Lavamat W 1259 Electronic Dear Customer Contents What to do if Trouble ShootingPage Safety Prior to initial start-upIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDescription of the Appliance Front viewDrawer for Detergent and Conditioners Programme selector Control PanelWOOL/SILK P Handwash Programme Option ButtonsQuick Consumption Values and Programme TimesBefore the First Wash Preparing a Wash LoadSorting and preparing a wash load Types of Washing and Care Symbols Water hardness details Detergent and Conditioners Which detergent and conditioner?How much detergent and conditioner? Water softeningRunning a washing cycle Brief instructionsAfter the washing programme has ended Loading the washing Opening and closing the doorAdding detergent/conditioners If using liquid detergents/tabletsFor the appropriate pro Setting the washing programmeDelicates Changing the spin speed / Selecting the rinse hold functionStarting the Wash Programme Programme ProgressChanging the washing programme Changing the Spin Speed Washing cycle complete/removing the washingWashing Programme TablesSeparate Spinning Separate RinsingDetergent Dispenser Drawer Maintenance and CleaningMain door Maintenance WashTo run a maintenance wash Washing Machine DrumCleaning the drain pump Operating Instructions What to do if Trouble ShootingMoved START/PAUSE Water tap is not fully Open the water tap fully If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleCarrying out an emergency emptying To set the additional rinse cycles When the water is completely drainedTo cancel the additional rinse cycles Additional rinse cycles RINSE+Child Safety Feature Setting the child safety featureCancelling the child safety feature Installation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transport packaging Are supplied with it Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionDisposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataGreat Britain Warranty conditionsIndex Service & Spare Parts 0870 5 929 Help us to help youCustomer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG