Electrolux LAVAMAT W 1259 manual Levelling the Appliance

Page 41

Installation and connection instructions

Levelling the Appliance

Floor unevenness can be compensated for and the height can be cor- rected with the four adjustable screw feet. The height can be adjusted in a range of +10 ... -5 mm.

To adjust the feet use the special spanner supplied.

01. Slide the special key firmly onto

the hexagon head of the threaded foot as far as it will go.

2. Adjust the screw feet so that the appliance is horizontal and stable.

3. Check that the appliance is level using a spirit level.

Important. Never use strips or shins of wood or cardboard etc. To compensate for any uneven- ness in the floor. Always use the adjustable feet.

41

Image 41

Contents Lavamat W 1259 Electronic Dear Customer Contents What to do if Trouble ShootingPage Intended Use SafetyPrior to initial start-up General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDrawer for Detergent and Conditioners Description of the ApplianceFront view Programme selector Control PanelWOOL/SILK P Handwash Programme Option ButtonsQuick Consumption Values and Programme TimesSorting and preparing a wash load Before the First WashPreparing a Wash Load Types of Washing and Care Symbols How much detergent and conditioner? Detergent and Conditioners Which detergent and conditioner?Water softening Water hardness detailsAfter the washing programme has ended Running a washing cycleBrief instructions Loading the washing Opening and closing the doorAdding detergent/conditioners If using liquid detergents/tabletsFor the appropriate pro Setting the washing programmeDelicates Changing the spin speed / Selecting the rinse hold functionChanging the washing programme Starting the Wash ProgrammeProgramme Progress Changing the Spin Speed Washing cycle complete/removing the washingWashing Programme TablesSeparate Spinning Separate RinsingDetergent Dispenser Drawer Maintenance and CleaningTo run a maintenance wash Maintenance WashWashing Machine Drum Main doorCleaning the drain pump Operating Instructions What to do if Trouble ShootingMoved START/PAUSE Water tap is not fully Open the water tap fully If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying To cancel the additional rinse cycles When the water is completely drainedAdditional rinse cycles RINSE+ To set the additional rinse cyclesCancelling the child safety feature Child Safety FeatureSetting the child safety feature Installation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionDisposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataGreat Britain Warranty conditionsIndex Customer Care Service & Spare Parts0870 5 929 Help us to help you AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG