Electrolux LAVAMAT W 1259 manual Pump head of greater than 1m

Page 47

Installation and connection instructions

If you intend the drain hose from the washing machine to empty into a sink, make sure that the sink is empty and the plug hose is not blocked. Use the plastic “U-Piece“ supplied.

Important! The end of the drainage hose must not be submerged in the pumped-out water. Otherwise, the water could be sucked back into the ap- pliance.

Pump head of greater than 1m

Every washing machine includes a wash water pump for the removal of wash and rinse water, which can pump fluids through the outlet hose up to a height of 1m, measured from the surface on which the machine stands.

For pump heads of greater than 1m please contact your local AEG Service Force Centre.

47

Image 47

Contents Lavamat W 1259 Electronic Dear Customer Contents What to do if Trouble ShootingPage Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDrawer for Detergent and Conditioners Description of the ApplianceFront view Programme selector Control PanelWOOL/SILK P Handwash Programme Option ButtonsQuick Consumption Values and Programme TimesSorting and preparing a wash load Before the First WashPreparing a Wash Load Types of Washing and Care Symbols Water hardness details Detergent and Conditioners Which detergent and conditioner?How much detergent and conditioner? Water softeningAfter the washing programme has ended Running a washing cycleBrief instructions Loading the washing Opening and closing the doorAdding detergent/conditioners If using liquid detergents/tabletsFor the appropriate pro Setting the washing programmeDelicates Changing the spin speed / Selecting the rinse hold functionChanging the washing programme Starting the Wash ProgrammeProgramme Progress Changing the Spin Speed Washing cycle complete/removing the washingWashing Programme TablesSeparate Spinning Separate RinsingDetergent Dispenser Drawer Maintenance and CleaningMain door Maintenance WashTo run a maintenance wash Washing Machine DrumCleaning the drain pump Operating Instructions What to do if Trouble ShootingMoved START/PAUSE Water tap is not fully Open the water tap fully If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleCarrying out an emergency emptying To set the additional rinse cycles When the water is completely drainedTo cancel the additional rinse cycles Additional rinse cycles RINSE+Cancelling the child safety feature Child Safety FeatureSetting the child safety feature Installation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionDisposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataGreat Britain Warranty conditionsIndex Customer Care Service & Spare Parts0870 5 929 Help us to help you AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG