Installation
Electrical connections
WARNING: THIS APPLIANCE MUST BE EARTHED.
The manufacturer declines any liability should this safety measure not be observed.
If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13 Amp socket in another part of your home.
Important |
| |
The wires in the mains lead are coloured in | GREEN &YELLOW 13AMP FUSE | |
accordance with the following code: | ||
|
Green and Yellow | - Earth |
Blue | - Neutral |
Brown | - Live |
13 AMP
If you fit your own plug, the colours of the |
|
wires in the mains lead of your appliance | BLUE |
may not correspond with the markings |
|
identifying the terminals in your plug, proceed as follows:
BROWN CORD CLAMP
Connect the green and yellow (earth) wire to the terminal in the plug which is marked with the letter «E» or the earth symbol 
or coloured green and yellow.
Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter «N» or coloured black.
Connect the brown (live) wire to the terminal in the plug which is marked with the letter «L» or coloured red.
The plug moulded on to the lead incorporates a fuse. For replacement, use a 13 Amp BS1363/A fuse. Only ASTA or BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier is lost. The cover/carrier is indicated by the coloured insert at the base of the plug.
A replacement cover/carrier must be obtained from your local AEG Service Centre.
The power supply cable must be easily accessible after installing the machine.
47