Electrolux 50435 Cleaning the drain pump, Pump, Before cleaning the drain pump, Gency emptying

Page 28

Operating Instructions

Cleaning the drain pump

 

Paper clips, nails and so on can sometimes get into the washing

 

machine with the washing and remain in the drain pump casing. Fluff

 

and strands of fabric can gather on these items and block the drain

 

pump.

 

Therefore the drain pump should be cleaned at least once a year.

1

Warning! Switch off the washing machine and pull out the mains plug

 

before cleaning the drain pump.

0 1.

First carry out emergency emptying (see section "Carrying out emer-

 

gency emptying“).

2.Place a towel on the floor in front of the cover of the drain pump. Surplus water may flow out.

3. Unscrew the drain pump cover anti- clockwise and pull it out.

4. Remove any foreign bodies from the pump housing.

5. Replace the cover. Insert the webs on the cover laterally into the guide slots and screw on the cover securely clock- wise.

6. Close the emergency emptying hose and place it in the holder.

7. Close the flap.

28

Image 28
Contents Lavamat Dear Customer Contents Separate Spin What to do ifContents Prior to initial start-up SafetyIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingFront view Description of the ApplianceDetergent Dispenser Drawer Control panel Program SelectorPrograms COTTONS/LINEN Main wash cycle for cottons/linen cold up to 95 CEASY-CARES programs Programs WOOL/DELICATESPump out Temperature SelectorProgram Option Buttons ON/OFF Button Shorter washing cycle for lightly soiled washingBefore the First Wash Consumption Data and Wash TimesPull the washing powder drawer out slightly Preparing a Wash Load Sorting and preparing a wash loadWashing Types and Care Symbols Detergent and Conditioners Which detergent and conditioner? How much detergent and conditioner?Water Softening Water hardness scalesWhen the wash program has ended Running a Wash CycleBrief instructions Loading the washingIf using liquid detergent/tablets Add detergent conditionerDetergents and conditioners Compartment for in-wash stain treatmentQuick Wash can be used in conjunction with Program settings Setting the Washing ProgramPossible program options to suit the type of washing Changing the Spin Speed/Selecting Rinse Hold Starting the Washing ProgramChanging settings Wash Program ProgressChanging/Interrupting the Washing Program Program progress displayWashing Cycle is complete/Removing Washing Wash program normally ends with the final spinIf Soaking has been selected If Rinse Hold has been selectedProgram Tables WashingSeparate Conditioning/Starching Separate RinseSeparate Spin Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpPump Gency emptyingTrouble Shooting What to do ifNot been removed Clean the detergent dis If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingHave a flat container on hand to catch the water Carrying out an emergency emptyingPull it out Child Safety Feature When the water is completely drainedCancelling the child safety feature Wise as far as it will goInstallation and Connection Instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceMeasures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Warranty Conditions Great BritainPage Page Index Service & Spare Parts 0870 5 929 Help us to help youPNC Customer Care