Electrolux 50435 manual Water connection, Water pressure

Page 42

Installation and connection instructions

Water connection

3

The washing machine is provided with safety devices preventing back-

 

contamination of the water supply and complies with local water

authority requirements.

This appliance is designed to be permanently plumbed into your home’s water supply.

Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.

Important!

– Appliances for connecting to cold water must not be connected to hot water.

– Only use new hose sets for the connection.

Water pressure

The appliance is designed to operate within the following water pressure units. Minimum 1 bar (= 10N/cm2 = 0.1 Mpa), maximum 10 bar (= 100N/cm2 = 1 Mpa).

If more than 10 bar: Install a pressure-reduction valve upstream

If less than 1 bar: Unscrew the inlet hose from the appliance at the inlet solenoid valve and remove the flow regulator (to do this, remove the filter with needle nose pliers and remove the rubber washer behind the filter). Replace the filter.

42

Image 42
Contents Lavamat Dear Customer Contents Separate Spin What to do ifContents Safety Prior to initial start-upIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDescription of the Appliance Front viewDetergent Dispenser Drawer Programs COTTONS/LINEN Control panelProgram Selector Main wash cycle for cottons/linen cold up to 95 CEASY-CARES programs Programs WOOL/DELICATESTemperature Selector Pump outProgram Option Buttons ON/OFF Button Shorter washing cycle for lightly soiled washingConsumption Data and Wash Times Before the First WashPull the washing powder drawer out slightly Preparing a Wash Load Sorting and preparing a wash loadWashing Types and Care Symbols Water Softening Detergent and Conditioners Which detergent and conditioner?How much detergent and conditioner? Water hardness scalesBrief instructions When the wash program has endedRunning a Wash Cycle Loading the washingDetergents and conditioners If using liquid detergent/tabletsAdd detergent conditioner Compartment for in-wash stain treatmentSetting the Washing Program Quick Wash can be used in conjunction with Program settingsPossible program options to suit the type of washing Changing the Spin Speed/Selecting Rinse Hold Starting the Washing ProgramChanging/Interrupting the Washing Program Changing settingsWash Program Progress Program progress displayIf Soaking has been selected Washing Cycle is complete/Removing WashingWash program normally ends with the final spin If Rinse Hold has been selectedProgram Tables WashingSeparate Rinse Separate Conditioning/StarchingSeparate Spin Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorPump Cleaning the drain pumpBefore cleaning the drain pump Gency emptyingTrouble Shooting What to do ifNot been removed Clean the detergent dis If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterPull it out Cancelling the child safety feature Child Safety FeatureWhen the water is completely drained Wise as far as it will goInstallation and Connection Instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceElectrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Warranty Conditions Great BritainPage Page Index PNC Service & Spare Parts0870 5 929 Help us to help you Customer Care