Electrolux 50435 manual Installation-Site preparation, Installation on a Suspended Floor

Page 38

Installation and connection instructions

Installation-Site preparation

The installation surface must be clean, dry and level. Do not install on a deep pile carpet.

Minor unevenness of the floor surface should never be levelled out by laying pieces of wood, card or similar materials, but should always be compensated for by adjusting the screw feet.

If the appliance is installed next to a heat source (e.g. cooking appli- ance), a heat insulating pad (87 x 57 cm) must be placed between the appliance and the heat source.

Do not install the appliance in locations where the temperature may fall below freezing.

Please ensure that when the appliance is installed it is easily accessi- ble for the engineer in the event of a breakdown.

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least

2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.

38

Image 38
Contents Lavamat Dear Customer Contents Separate Spin What to do ifContents Intended Use SafetyPrior to initial start-up Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDetergent Dispenser Drawer Description of the ApplianceFront view Programs COTTONS/LINEN Control panelProgram Selector Main wash cycle for cottons/linen cold up to 95 CEASY-CARES programs Programs WOOL/DELICATESProgram Option Buttons Temperature SelectorPump out ON/OFF Button Shorter washing cycle for lightly soiled washingPull the washing powder drawer out slightly Consumption Data and Wash TimesBefore the First Wash Preparing a Wash Load Sorting and preparing a wash loadWashing Types and Care Symbols Water Softening Detergent and Conditioners Which detergent and conditioner?How much detergent and conditioner? Water hardness scalesBrief instructions When the wash program has endedRunning a Wash Cycle Loading the washingDetergents and conditioners If using liquid detergent/tabletsAdd detergent conditioner Compartment for in-wash stain treatmentPossible program options to suit the type of washing Setting the Washing ProgramQuick Wash can be used in conjunction with Program settings Changing the Spin Speed/Selecting Rinse Hold Starting the Washing ProgramChanging/Interrupting the Washing Program Changing settingsWash Program Progress Program progress displayIf Soaking has been selected Washing Cycle is complete/Removing WashingWash program normally ends with the final spin If Rinse Hold has been selectedProgram Tables WashingSeparate Spin Separate RinseSeparate Conditioning/Starching Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorPump Cleaning the drain pumpBefore cleaning the drain pump Gency emptyingTrouble Shooting What to do ifNot been removed Clean the detergent dis If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingPull it out Carrying out an emergency emptyingHave a flat container on hand to catch the water Cancelling the child safety feature Child Safety FeatureWhen the water is completely drained Wise as far as it will goInstallation and Connection Instructions Installation Safety PrecautionsRemove transport packaging Installation of the applianceTransporting the appliance Installation and connection instructions Special spanner E Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceEarth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Warranty Conditions Great BritainPage Page Index PNC Service & Spare Parts0870 5 929 Help us to help you Customer Care