Electrolux 50435 manual Water Drainage

Page 44

Installation and connection instructions

Water Drainage

The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see dia- gram) thus ensuring there is an air break between the drain hose and standpipe.

Important! It is essential to lay the drainage hose without kinks.

When discharging into a stand- pipe ensure that the top of the curve in the hose end is no more than 90 cm (35.4’’) and no less than 60 cm (23.6’’) above floor level.

The upright standpipe should have a minimum, length of

30 cm (12’’) from the bottom of the elbow to the top of the pipe (see diagram). Make sure that it is designed in such a way that the end of the drain hose cannot be covered with water.

Longer drain hoses are available in lengths of 2.7 and 4 metres from your AEG Service Force Centre.

44

Image 44

Contents Lavamat Dear Customer Contents Separate Spin What to do ifContents Intended Use SafetyPrior to initial start-up Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDetergent Dispenser Drawer Description of the ApplianceFront view Control panel Program SelectorPrograms COTTONS/LINEN Main wash cycle for cottons/linen cold up to 95 CEASY-CARES programs Programs WOOL/DELICATESProgram Option Buttons Temperature SelectorPump out ON/OFF Button Shorter washing cycle for lightly soiled washingPull the washing powder drawer out slightly Consumption Data and Wash TimesBefore the First Wash Preparing a Wash Load Sorting and preparing a wash loadWashing Types and Care Symbols Detergent and Conditioners Which detergent and conditioner? How much detergent and conditioner?Water Softening Water hardness scalesWhen the wash program has ended Running a Wash CycleBrief instructions Loading the washingIf using liquid detergent/tablets Add detergent conditionerDetergents and conditioners Compartment for in-wash stain treatmentPossible program options to suit the type of washing Setting the Washing ProgramQuick Wash can be used in conjunction with Program settings Changing the Spin Speed/Selecting Rinse Hold Starting the Washing ProgramChanging settings Wash Program ProgressChanging/Interrupting the Washing Program Program progress displayWashing Cycle is complete/Removing Washing Wash program normally ends with the final spinIf Soaking has been selected If Rinse Hold has been selectedProgram Tables WashingSeparate Spin Separate RinseSeparate Conditioning/Starching Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpPump Gency emptyingTrouble Shooting What to do ifNot been removed Clean the detergent dis If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingPull it out Carrying out an emergency emptyingHave a flat container on hand to catch the water Child Safety Feature When the water is completely drainedCancelling the child safety feature Wise as far as it will goInstallation and Connection Instructions Installation Safety PrecautionsRemove transport packaging Installation of the applianceTransporting the appliance Installation and connection instructions Special spanner E Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceEarth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Warranty Conditions Great BritainPage Page Index Service & Spare Parts 0870 5 929 Help us to help youPNC Customer Care