Electrolux 50435 manual Inlet Hose Connection

Page 43

Installation and connection instructions

Inlet Hose Connection

A pressure hose of 1.35m in length is supplied.

If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections is permissible, available from AEG Service Force Centres.

Hose sets in lengths of 2.2m, 3.5m, and 5m are available for washing machines without Aqua-Control.

Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for wash- ing machines with Aqua-Control.

Important! Never cut into pieces in order to extend the hoses!

3

Sealing rings are supplied either in the plastic

 

nuts of the hose screw connection or in the

enclosed pack. Do not use other seals!

0 1. Connect the hose with the angled connection to the machine.

Important!

– Do not lay the inlet hose verti- cally downwards, instead run it to the right or left as shown in the diagram.

– Only tighten the hose screw connection by hand.

2. Connect the hose with the straight connection to a water tap with a screw thread R 3/4 (inches) Important! Only tighten the screw connection by hand.

3. By slowly opening the water tap before putting the washing machine into operation, check that the connection is free of leaks.

43

Image 43
Contents Lavamat Dear Customer Contents What to do if Separate SpinContents Prior to initial start-up SafetyIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsFront view Description of the ApplianceDetergent Dispenser Drawer Main wash cycle for cottons/linen cold up to 95 C Control panelProgram Selector Programs COTTONS/LINENPrograms WOOL/DELICATES EASY-CARES programsPump out Temperature SelectorProgram Option Buttons Shorter washing cycle for lightly soiled washing ON/OFF ButtonBefore the First Wash Consumption Data and Wash TimesPull the washing powder drawer out slightly Sorting and preparing a wash load Preparing a Wash LoadWashing Types and Care Symbols Water hardness scales Detergent and Conditioners Which detergent and conditioner?How much detergent and conditioner? Water SofteningLoading the washing When the wash program has endedRunning a Wash Cycle Brief instructionsCompartment for in-wash stain treatment If using liquid detergent/tabletsAdd detergent conditioner Detergents and conditionersQuick Wash can be used in conjunction with Program settings Setting the Washing ProgramPossible program options to suit the type of washing Starting the Washing Program Changing the Spin Speed/Selecting Rinse HoldProgram progress display Changing settingsWash Program Progress Changing/Interrupting the Washing ProgramIf Rinse Hold has been selected Washing Cycle is complete/Removing WashingWash program normally ends with the final spin If Soaking has been selectedWashing Program TablesSeparate Conditioning/Starching Separate RinseSeparate Spin Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumGency emptying Cleaning the drain pumpBefore cleaning the drain pump PumpWhat to do if Trouble ShootingNot been removed Clean the detergent dis If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingPull it out Wise as far as it will go Child Safety FeatureWhen the water is completely drained Cancelling the child safety featureInstallation Safety Precautions Installation and Connection InstructionsTransporting the appliance Installation of the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Great Britain Warranty ConditionsPage Page Index Customer Care Service & Spare Parts0870 5 929 Help us to help you PNC