JVC KD-DB711 manual TA Standby Reception, What you can do with RDS

ENGLISH	What you can do with RDS
	Radio Data System (RDS) allows FM
	stations to send an additional signal along
	with their regular programme signals.
	By receiving the RDS data, this receiver can
	do the following:
	• Programme Type (PTY) Search (see page 11)
	• Standby Reception of Traffic
	Announcement—TA (see the following) or
	PTY (see pages 13 and 23)
	• Tracing the same programme automatically
	—Network-Tracking Reception (see page 13)
	• Programme Search (see page 23)

Storing your favorite programmes

You can store six favorite programme types.

Preset programme types in the number buttons (1 to 6):

3Repeat steps 1 and 2 to store other PTY codes into other preset numbers.

4Finish the procedure.

Using the standby receptions

You can use two types of Standby Reception— TA Standby Reception and PTY Standby Reception—both for FM station and DAB services.

TA Standby Reception

TA Standby Reception allows the receiver to switch temporarily to an FM RDS station or a DAB service broadcasting Traffic Announcement from any source other than AM. The volume changes to the preset TA volume level (see page 23).

1Select a PTY code (see page 11).

2Select the preset number (1 – 6) you want to store into.

To activate TA Standby Reception

The TP indicator either lights up or flashes.

•If the TP indicator lights up, TA Standby Reception is activated.

•If the TP indicator flashes, TA Standby Reception is not yet activated.

To activate TA Standby Reception, tune in to another FM RDS station or DAB service providing the signals required for TA Standby Reception. The TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

Ex.: When “SOCIAL” is stored

12