Indesit G85C manual Emptying the Water Container

Page 15

Emptying the Water Container

Water

Container

Water

Container

Plinth	Sink
Plinth
Moulding
(not fitted to
all models)

Empty the water container after EVERY programme. Failure to do this will result in the water container becoming full and the load will not dry.

To Empty Water Remove plinth (where fitted) by slightly lifting and sliding to the left.

Container

Pull the container out of the dryer and empty it into a sink or other suitable drain).

15

Image 15

Contents Tumble dryer Contents For your safety Always Electrical Requirements Refer to the Rating Plate for Voltage and CurrentQualified Electrician Clean After Each Load Features Get to know the main parts of your dryerDoor Reversal Instructions Where to put your dryerRemoving Items How to use your dryerTimed Programmes for load sizes less than 1kg ControlsRe-start the programme. See previous Indicator LampPhase Cool TumbleEasy Iron Programme When to use ‘Easy Iron’ Audio SignalMaximum load size Typical load Sorting your laundryItems not suitable for tumble drying Wash Care LabelsConditioner be Added to the Dryer Itself Items requiring special attentionContainer Emptying the Water ContainerThere are However Some Items That WE do not Advise Guide to drying timesRoom Longer to dry than if the room is warm Bulky items Return them to the dryerDo not use Caring for your DryerEvery Week Every Month‘The Dryer is Problem Check these things firstIf something goes wrong ‘It is taking a long time to dry’If it still won’t work Printed by Simlex . Four ASHES, Wolverhampton