How to use your dryer
1.Plug in, switch on electricity.
WARNING: WHEN SWITCHING ON OR OFF, PLEASE ENSURE THAT YOUR HANDS ARE DRY
2.Sort your laundry (see section “Sorting Your Laundry”)
3.Open the door by pressing and releasing the front panel in the position shown.
4.Always check the following:
FLUFF FILTER
is clean and in place
WATER CONTAINER is empty and in place
CONDENSER
is clean and in place
5.Load the dryer placing the clothes carefully in the drum pushing them well towards the back and away from the door seal. Close the door.
6. Select the alarm, | 7. Select the |
if required. | required programme |
(see section “The | or drying time. |
Controls”) | (see section “The |
| Controls”) |
8.Press the
START switch to commence the drying programme.
9.When finished open the door and take out the laundry. Clean and replace the fluff filter, and empty the water container.
10.Switch off electricity and remove plug from socket.
WARNING: WHEN SWITCHING ON OR OFF, PLEASE ENSURE THAT YOUR HANDS ARE DRY
Removing Items | By opening the door you can check the dryness of the load as often |
| as you wish and if you want, remove some items before they are |
| fully dry. (This is particularly useful for a mixed load where you want |
| to iron some items, but others are to be fully dried.) You will need |
| to press the start button after closing the door to |
| programme. See section ‘The Controls’. |
8