The Controls
Start Switch | Active / Empty Water Light |
Alarm Switch | Programme Control |
Setting the To set the programme, all you have to do is turn the Programme
Programme Control knob until the required selection appears in line with the indicator.
Programme | Automatic programmes (for load sizes more than 1kg) | ||||
Options | 1. | Dry Cottons | ( HIGH heat) | This gives driest results. | |
|
|
| Some bulky items or large load of towels | ||
|
|
| may appear slightly damp after this | ||
|
|
| programme and require a short period of | ||
|
|
| timed drying. |
| |
| 2. | Damp Cottons | ( | HIGH heat) | |
3.
Iron Dry Cottons 
(
HIGH heat)
This gives the wettest results.
4. Dry Synthetics 
( LOW heat)
5.Damp Synthetics 
( 
LOW heat)
6. | Iron Dry Synthetics | ( | LOW heat) |
Timed | programmes (for load sizes less than 1kg) | ||
7.40 minutes ( 
LOW heat) include cool tumble followed by the Crease Care phase.
8.30 minutes ( 
LOW heat) include cool tumble followed by the Crease Care phase.
9.20 minutes ( 
LOW heat) include cool tumble followed by the Crease Care phase.
10.
Airing, 20 minutes of cool tumble.
11.
Easy Iron Programme, see section"Easy Iron Programme". For description of other programmes see next page.
Starting the Dryer Press and release the START button to commence a drying programme (The drying programme must have been selected first).
The Active 
Light will then glow.
NOTE: If the door is opened during a programme, the Dryer will automatically stop. To continue the programme, after closing the door, the START button must be pressed.
Alarm 
Switch The alarm option is selected with the switch in the OUT position, if you do not need this option press the switch to the IN position. The alarm (if selected) will sound at the end of the programme or intermittently during the Crease Care phase.
9