Whirlpool W10097012B Vacation, storage, and moving care, Moving Care, Reinstalling the Dryer

Page 10

Vacation, storage, and moving care

Install and store your dryer where it will not freeze. Because some water may stay in the hoses, freezing can damage your dryer. If storing or moving your dryer during freezing weather, winterize it.

Non-Use or Storage Care

Operate your dryer only when you are at home. If you will be on vacation or not using your dryer for an extended period of time, you should:

1.Unplug dryer or disconnect power.

2.Clean lint screen. See “Cleaning the Lint Screen.”

Moving Care

For power supply cord-connected dryers:

1.Unplug the power supply cord.

2.Steam models only: Shut off water faucet.

3.Steam models only: Disconnect the water inlet hose from faucet, then drain the hose. Remove the hose from the back of the dryer. Transport hose separately.

4.Make sure leveling legs are secure in dryer base.

5.Use tape to secure dryer door.

Changing the drum light (on some models)

1.Unplug dryer or disconnect power.

2.Open the dryer door. Locate the light bulb cover on the back wall of the dryer. Using a Phillips-head screw driver, remove the screw located in the lower right-hand corner of the cover. Remove the cover.

3.Turn bulb counterclockwise. Replace the bulb with

a 10-watt appliance bulb only. Replace the cover and secure with the screw.

4.Plug in dryer or reconnect power.

For direct-wired dryers:

1.Disconnect power.

2.Disconnect wiring.

3.Steam models only: Shut off water faucet.

4.Steam models only: Disconnect the water inlet hose from faucet, then drain the hose. Transport hose separately.

5.Make sure leveling legs are secure in dryer base.

6.Use tape to secure dryer door.

Reinstalling the Dryer

Follow the “Installation Instructions” to locate, level, and connect the dryer.

Changing the Automatic Cycle Settings to Increase Drying Time

If all your loads on all Automatic cycles are consistently not as dry as you would like, you may change the default settings to increase the default dryness level.

Your automatic drying settings can be adjusted to adapt to different installations, environmental conditions or personal preference. This change is retained and will affect all of your Automatic cycles, not just the current cycle/load. There are 3 drying settings, which are displayed using the Cycle Status light (Wet, Damp, Cool Down LEDs)

1Factory preset dryness level.

2Slightly drier clothes, 15% more drying time.

3Much drier clothes, 30% more drying time.

To change the drying settings (on some models):

NOTE: The settings cannot be changed while the dryer is running or paused. The dryer must be in standby mode (the power button is off) to adjust the default settings.

1.Before starting a cycle, press and hold the TEMP button for 6 seconds.

2.Press the TEMP button to select the dryness level shown in the cycle status light display: Wet light on = level 1, Wet and Damp lights on = level 2, and Wet, Damp and Cool Down lights on = level 3.

3.Press START/PAUSE to save the new dryness level setting.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Table of Contents Dryer Safety Your safety and the safety of others are very importantWhat to do if YOU Smell GAS Good Air Flow Check Your Vent System for Good AIR FlowMaintain good air flow by Control Panel & Features Cycle Guide Automatic Cycles Setting the Drying TemperatureCycle Guide Timed DRY Clean the lint screen Load the dryer Using Your DryerPress Power Press START/PAUSE to begin cycle Set cycle settingsSelect the desired cycle Select cycle options if desired Remove garments promptly after cycle is finishedCleaning the lint screen Cleaning the dryer locationCleaning the dryer interior Dryer CareVacation, storage, and moving care Reinstalling the DryerTo change the drying settings on some models Moving CareTroubleshooting If you experience Possible Causes SolutionTroubleshooting Whirlpool Corporation Laundry Warranty This limited warranty does not coverSécurité DE LA Sécheuse Votre sécurité et celle des autres est très importanteQUE Faire Dans LE CAS D’UNE Odeur DE GAZ Circulation d’air adéquate Nettoyer le filtre à charpie avant chaque chargeTableau DE Commande ET Caractéristiques Guide DE Programmes Séchage Minuté Guide DE Programmes Programmes AutomatiquesOptions disponibles Réglage de la température de séchage Utilisation DE LA Sécheuse Appuyer sur Power mise sous tensionNettoyer le filtre à charpie Charger la sécheuse Sélectionner les options de programme si désiré Sélectionner le programme désiréSélectionner les réglages de programme Caractéristique Wrinkle ShieldNettoyage de l’intérieur de la sécheuse Nettoyer l’emplacement de la sécheuseEntretien DE LA Sécheuse Retirer la charpie accumuléeChangement de la lampe du tambour sur certain modèles Réinstallation de la sécheusePrécautions à prendre avant un déménagement Pour modifier les réglages de séchage sur certains modèlesDépannage Dépannage suite Garantie DES Gros Appareils Ménagers Whirlpool Corporation Page U.S.A U.S.A. and Canada

W10097012B, W10097015B SP specifications

Whirlpool is a well-known brand in the appliance industry, providing solutions that combine modern technology with user-friendly designs. Two of its noteworthy models are the Whirlpool W10097015B SP and the W10097012B. These products are designed to enhance efficiency and convenience in your home, particularly in kitchen environments.

The Whirlpool W10097015B SP is a premium refrigerator that emphasizes energy efficiency and storage versatility. Designed with a spacious interior, this refrigerator offers adjustable shelving and bin configurations that accommodate various food sizes and types. The unit is equipped with advanced cooling technology that maintains optimal temperatures, reducing food spoilage. The LED lighting illuminates the interior, making it easy to find your items.

One of the key features of the W10097015B SP is the Adaptive Defrost system, which monitors the frost level and activates defrost only when necessary. This not only saves energy but also promotes the longevity of the appliance. Additionally, the refrigerator includes the In-Door-Ice storage that frees up shelf space to maximize food storage.

On the other hand, the Whirlpool W10097012B is a built-in under-counter refrigerator that caters to those who prioritize space-saving designs without sacrificing functionality. It is ideal for smaller kitchens or for creating a bar area. This model also features adjustable shelves and a reversible door for flexible installation options. The stainless steel finish gives it a sleek and modern look that complements various kitchen styles.

Both models incorporate Whirlpool's Total Food Preservation technology, which ensures that food retains its freshness for a longer period. This feature includes humidity-controlled crispers that help keep fruits and vegetables crisp while preventing them from wilting.

In terms of user convenience, both refrigerators come with easy-to-use electronic controls that allow for precise temperature adjustments, ensuring your food is stored under optimal conditions. Additionally, they are equipped with water filtration systems that provide clean, fresh-tasting water and ice, further enhancing the user experience.

In conclusion, the Whirlpool W10097015B SP and W10097012B are both exemplary models that showcase Whirlpool’s commitment to quality, innovation, and design. With their advanced technologies and thoughtful features, they stand out as attractive options for any modern kitchen, elevating both functionality and style.
Top Page Image Contents