JVC SP-XCV70 Amplifier section, Front/Center/Rear, At 1 kHz, with 10 %, Total harmonic distortion

Page 83

7Subwoofer (SP-PWV70)

Amplifier section

Front/Center/Rear:

30 W per channel, RMS at

 

4 Ω at 1 kHz, with 10 %

 

total harmonic distortion.

Subwoofer:

140 W, RMS at 4 Ω at 100

 

Hz, with 10 % total

 

harmonic distortion.

Speaker:

20 cm

 

Bass-reflex, Magnetically

 

Shielded

Power Requirements:

AC 230 V Ó, 50 Hz

Power Consumption:

120 W (at operation)

 

0 W (in standby mode)

Frequency Range:

25 Hz to 200 Hz

Dimensions (W × H × D):

240 mm × 435 mm × 496

 

mm

Mass:

16.5 kg

7Satellite Speakers (SP-XSV70)

Speakers:

7 cm × 4 cm

 

Bass-reflex, Magnetically

 

Shielded

Power Handling Capacity:

30 W

Impedance:

4 Ω

Frequency Range:

95 Hz to 20 kHz

Dimensions (W × H × D):

68 mm × 134 mm × 109

 

mm

Mass:

410 g

7Center Speaker (SP-XCV70)

Speakers:

7 cm × 4 cm

 

Bass-reflex, Magnetically

 

Shielded

Power Handling Capacity:

30 W

Impedance:

4 Ω

Frequency Range:

90 Hz to 20 kHz

Dimensions (W × H × D):

153 mm × 70 mm × 109

 

mm

Mass:

430 g

7Accessories

Remote control (1) Batteries (2)

Stand (1) (for the center unit) Legs (2) (for the stand)

FM antenna (1)

AM (MW) loop antenna (1) Power cord (1)

System cord (1) Video cord (1) Speaker cords

5 m (3): For the left front speaker, right front speaker, and center speaker

10 m (2): For the left rear speaker and right rear speaker (The length of the speaker cords above are approximate.)

Speaker wall brackets (2) Screws

For the stand (1)

For the speaker wall brackets (2) Paper pattern (1)

Designs & specifications are subject to change without notice.

78

Image 83
Contents Consists of XV-THV70R, SP-PWV70, SP-XSV70, and SP-XCV70 TH-V70RIf in Doubt Consult a Competent Electrician Important for Laser Products Above ALL Page Table of Contents Important cautions Checking the supplied accessoriesSafety precautions IntroductionRear panel Names of parts and controlsCenter unit Front panelDisplay window Powered subwooferFront Powered subwoofer Display windowNames of parts and controls Remote controlRemote control ALL About discsPlayable disc types PALPlayback Control function PBC High-resolution still image displayAbout discs Disc structureGetting started Setting the DISP.SET selectorWhen placing the center unit vertically When placing the center unit HorizontallyFor connections, see pages 10 to When placing the center unit verticallyGetting started Attach the legs to the standConnections Connecting a TVTo connect a TV without the Scart connector To connect a TV with the Scart connectorFM antenna Connecting the FM and AM MW antennasAM MW loop antenna Speaker layout Connecting the powered subwooferConnecting the satellite speakers Powered subwooferConnecting the speaker cord to the powered subwoofer Connecting the satellite front, center, rear speakersBefore connecting the speaker cord Connecting the speaker cord to the satellite speakersRCA pin plug cord To audio output Connecting to an analog componentConnecting to a digital component Connecting the power cord Attaching speakers to the brackets Installing the equipment on the wallWhen attaching the rear speakers to a wall When attaching the AM MW loop antenna to a wallExample of attachment When attaching the center unit to a wallPage Replace the cover Using the remote controlPutting batteries in the remote control Operating the system from the remote controlTry to operate your TV by pressing TV Using the remote control for TV operationsSetting the remote control signal for operating your TV Release TVTurning on/off the system Press Audio to turn the power on Press to turn the power onBasic operations Selecting the source to play Adjusting volumePress Volume + or -. Press VOL + or Press Muting To restore the soundBasic operations Turning off the sound temporarilyPress Sleep Adjusting the brightnessTurning off the power with the timer Press DimmerSubwoofer + Changing the decode modePhase setting Setting the subwooferVolume control Turn Volume knobPreventing screen burn-out with the screen saver When the center unit is placed horizontally, pressBasic playback Inserting and removing a discStopping playback temporarily Starting playback again Basic playbackStopping playback completely Moving back the playback position during DVD playbackLocating the beginning of a desired chapter or track Locating a desired selection using Number buttonsSearching for a particular point Tuner operations Tuning in to stations manuallyUsing preset tuning To store the preset stationsReducing the noise of AM MW broadcast Selecting the FM reception modeTo tune in to a preset station Tuner operations Using the RDS Radio Data System to receive FM stationsWhat information can RDS signals provide? To show the RDS signalsPTY Search To search for a program using the PTY codesSearching for a program by PTY codes Press PTY Search while listening to an FM stationTA News Info TA/NEWS TA/INFO Switching to broadcast program of your choice temporarilyTest TA/NEWS/INFOCase How the Enhanced Other Network function actually worksDTS Digital Surround Digital signal format indicators on the display windowCreating the realistic sound fields Dolby SurroundCreating sound field Available Surround modes for each input signalDAP Digital Acoustic Processor modes All Channel Stereo All Channel Stereo reproductionCreating the realistic sound fields Selecting the surround modePress Test again to stop the test tone Using DAP Modes and All Channel StereoAdjust the speaker output levels -10 dB to +10 dB Adjust the speakers output levels -10 dB to +10 dBShowing the on-screen bar Using the on-screen barContents of the on-screen bar Advanced operationsPress Cursor ∞/5 to select the desired option Basic operation through the on- screen barChanging the time information Press on Screen twicePress TOP Menu or Menu Advanced operationsLocating a desired scene from the disc menu Locating a desired scene from the DVD menuPress Angle repeatedly to select the desired view angle Selecting a view angle of DVDSelecting a view angle Press AngleSelecting the subtitle language Changing the subtitle languages and audio languagesShowing all view angles on the TV On-screen bar appears on the TV screen Selecting the audio languagePress Audio Press Audio repeatedly to select the desired audio languageST 1 ST 2 L 1 R 1 L 2 R Selecting the audio channelPress Cursor ∞/5 to select the desired audio language Press Audio repeatedly to select the desired audio channelCursor and Enter button Playing from a specified position on a discLocating a desired chapter from the on-screen bar Press Cursor ∞/5 to select the desired audio channelsPress Digest Locating a desired position by specifying the timeLocating a desired scene from the digest display Use Number buttons 0-9 to enter the timeShowing continuous still pictures Special picture playbackFrame-by-frame playback Press Zoom + or Playing back in slow-motionZooming in/out Press ¡ orRepeat steps 2-5 to adjust other parameters Changing the VFP settingPress Cursor 3/2 repeatedly to select the VFP mode To adjust User 1 or UserRepeat to program the next steps Changing the track orderPlaying back in the desired order Playing back tracks in random orderRepeating a desired part Press Cursor ∞/5 repeatedly to select the repeat modeRepeat playback Repeating a current title, chapter, or all tracksAs many times as required MP3 disc playbackBasic operations Insert an MP3 discOperations Operations through the MP3 control displayMP3 control display 01 / 14 TotalPress Zoom + or while the slide-show is paused. See also Jpeg disc playbackSlide-show Insert a Jpeg discPress Menu Operations through the Jpeg control displayJpeg control display Press Number buttons 0-10, +10 to enter the file numberChoice menus Setting DVD preferencesUsing the choice menus Choice button Basic procedure through the choice menusDesired option Language menu Setting DVD preferencesLanguage codes list Items Contents and guidelinesMP3/JPEG Picture menuMonitor Type Screen SaverAudio menu Size menu SPK. Setting menuDistance menu Level menuOthers menu Cursor Enter buttons Setting Parental LockRestricting playback by Parental Lock ChoiceReleasing Parental Lock temporarily Changing the setting of Parental LockPress Number buttons 0-9 to enter your password New setting is storedCountry/Area codes list for Parental Lock Repeat steps 2 and 3 to set other items Setting the system through the display windowPress Setting Press Cursor 2/3 to make an adjustmentTry to operate your VCR by pressing VCR Setting the remote control signal for operating yourOperating other manufacturers’ VCR Release VCRHandling Discs MaintenanceCleaning the system General NotesGeneral TroubleshootingDVD Playback Others TroubleshootingMP3 Playback Jpeg PlaybackRefers to individual chapters included in a title GlossarySpecifications Total harmonic distortion Amplifier sectionFront/Center/Rear At 1 kHz, with 10 %0402TMMMDWJEM