Troubleshooting, MP3 Playback, Jpeg Playback, Others

Troubleshooting

POSSIBLE CAUSE

SOLUTION

No MP3 files are recorded on the disc.

MP3 files do not have the file extension —.mp3, .Mp3, .mP3, or .MP3 in their file names.

MP3 files are not recorded in the format compliant with ISO 9660 Level 1 or 2.

The different types of files are recorded on a disc.

Replace the disc.

Add the file extension—.mp3, .Mp3,

.mP3, or .MP3—to their file names. (See page 55.)

Replace the disc.

(Record MP3 files using a compliant application.)

The disc which contains the different types of files may not be played because of its disc characteristics or recording conditions.

Not MP3 files but JPEG files are	The MP3/JPEG setting is set to “JPEG.”	When both MP3 files and JPEG files are
played.		recorded on a disc, to play MP3 files, set
		the setting to “MP3.”
		(See page 62.)

The MP3 control display appears	Any MP3 files or JPEG files are not	Replace the disc. (See page 6.)
on the TV screen, but any	recorded on the disc, or the disc is the
operation cannot be performed.	unplayable disc (such as CD-ROM).
A disc cannot be played.	No JPEG files are recorded on the disc.	Replace the disc.

	JPEG files do not have the correct file	Add the file extension—.jpg, .jpeg, .JPG,
	extension in their file names.	.JPEG or any uppercase and lowercase
		combination (such as “.Jpg”)—to their
		file names. (See page 57.)

	JPEG files are not recorded in the format	Replace the disc.
	compliant with ISO 9660 Level 1 or 2.	(Record JPEG files using a compliant
		application.)

Not JPEG files but MP3 files are	The MP3/JPEG setting is set to “MP3.”	When both MP3 files and JPEG files are
played.		recorded on a disc, to play JPEG files,
		set the setting to “JPEG.” (See page 62.)

Hard to listen to broadcast	Antennas are disconnected.	Reconnect the antennas correctly and
because of noise.		securely.

	The AM (MW) loop antenna is too close	Change the position and direction of the
	to the center unit.	AM (MW) loop antenna.
	The supplied FM antenna is not properly	Extend the FM antenna at the best
	extended and positioned.	position.

	Beat Cut mode is not set properly while	Try to change the Beat Cut mode.
	listening to an AM (MW) broadcast.	(See page 32.)

Continuous static during FM	The received signal is too weak.	Connect an external FM antenna
broadcasts.		(see page 11), or contact your dealer.
	The station is too far away.	Select another station.
Suddenly, the system turns off	The sleep timer or auto standby function	Turn the functions off.
by itself.	is activated.	(See pages 24 and 66.)

The indications on the moving	DISP.SET selector is not set correctly.	Set it correctly. (See page 8.)
panel is displayed upside-
down.

NOTE:

Problems may be caused by the components connected to the system. So read also the manuals for the components carefully.