Installation
WARNING
Before installation, disconnect the tumble dryer from the electrical supply by shutting off the power main or tripping the circuit breaker. Be sure the dryer power cord is unplugged from the wall.
Do not restore power until the installation is complete.
Turn the dryer’s gas shutoff valve in the supply line to the OFF position.
Disconnect and discard old flexible gas connector and ducting material.
Determining the position of the exhaust connection
The exhaust connection can be left at the rear of the dryer (factory standard) or moved to the left or right side.
Changing the position of the exhaust connection
WARNING
With left or right exhaust connections, the restriction insert must be integrated into the side exhaust ducting guide. Otherwise poor drying results, damage to the laundry and higher Carbon monoxide emissions may occur.
Place the restriction insert into the adapter (see "Exhaust connection with a flexible exhaust hose or rigid pipe").
Remove the exhaust connection cover on the left or right side of the dryer by turning it counterclockwise and take it out.
Firmly press the cover into the rear exhaust connection.
Remove the restriction insert.
12