Ducting
Exhaust connection with a flexible exhaust hose or rigid pipe
Using the adapter supplied, an exhaust hose (4" [100 mm] diameter) can be installed.
Necessary materials:
–a wall or window duct (available from Miele)
–an exhaust hose made of approved
Install the required adapter* 1 with the exhaust hose or pipe 2 to the dryer.
*The white adapter with clips is used for connection to a hose; the gray adapter without clips is used for connection to a pipe.
WARNING
Do not remove the restriction insert in the vent opening. It may result in poor drying results, damage to the laundry and higher Carbon monoxide emissions.
The exhaust duct must not be connected or secured with screws or other fastening devices which extend into the interior of the duct.
Exhaust connection on left or right
Place the restriction insert 1 into the adapter 2.
23