Miele W 1215 operating instructions Plumbing, Optional accessory hose extension

Page 49

Plumbing

The washing machine can be connected to a potable water supply. A non-return valve is not required unless required by building code.

The washing machine has 1/2" pressure hoses with 3/4" female hose thread connections. If there is no water hookup, contact a plumber to install a connection. Make sure that the sealing ring is seated properly on the hose connector.

Replace the hose with a genuine Miele hose only, or with a hose able to withstand up to 145 psi (10 bar) pressure. The water valve connector must also be able to withstand 145 psi (10 bar).

,The bolted connection is pressurized by water pressure. Open the water valve slowly to check for leaks. Adjust the rubber seal and the bolted connection if necessary.

To protect the inlet valve the two filters - one at the pressure hose / valve connection and one at the the inlet connection to the solenoid valve- must not be removed.

Optional accessory hose extension

Hose extensions with a length of

8’ 2 7/16" to 13’ 1 1/2" (2.5 to 4 m) are available from your Miele dealer or

Miele’s Technical Service Department.

45

Image 49

Contents Operating instructions Contents Contents Important Safety Instructions Control panel Guide to the washerBefore using for the first time Prepare and sort the laundry Using the washerGeneral tips Select a program Load the laundryProgram guide Cold Med Temperatures Fabric Spin Laundry Care Speed Symbol WoolensSilk HandwashSelect wash options if needed Select the temperature and spin speed Hold Special spin optionsNo spin Too little detergent may cause Add detergentToo much detergent may cause Normal soiling DetergentHeavy soiling Water softener Water hardnessFabric softener Do not exceed the maximum level mark StarchCancelling Delay Start Select Delay Start if neededStart the program Activate the program lock if necessaryRemove the laundry Making changes to the program Cancelling a programInterrupting a program Drum door cannot be opened if Adding/removing laundry during a wash programLocking the washer Child Safety LockElectronic program lock Cleaning the detergent drawer Cleaning the washerClean the siphon tube Washer careCleaning the drain pump Washer care Remove this guide for easy reference Quick GuideSort the laundry Quick GuideLoad the laundry Select a programSelect Delay Start if needed Select the temperature and spin speedAdd detergent Start the programNormal Options Cleaning the inlet hose filter Cleaning the water inlet filtersCleaning the filter in the inlet valve Wash program cannot be started Frequently asked questionsProgram was interrupted and a fault message appears General issues with the washer Poor wash results Door will not open when the Door button is pressed Remove the tool Opening the drum door during a power failurePC Update Technical ServiceWarranty terms Optional accessoriesInstallation Instructions Disposal of the packing material Help protect our environmentDisposal of an appliance Front view InstallationBack view Installation site Remove the shipping struts InstallationDo not lift the washer by the drum door Pull out the shipping strut InstallationInstalling the shipping struts Level the washer Adjust the four leveling feetReinstallation of the machine lid Installation beneath a counterWasher stand with drawer Plumbing Optional accessory hose extensionTips for a hot water connection Water connectionDrainage Grounding Instructions Electrical connectionPage Page Page Alterations rights reserved

Related manuals

Manual 56 pages 61.35 Kb