Miele W 1215 operating instructions Installation beneath a counter, Washer stand with drawer

Page 48

Installation

Installation beneath a counter

Washer/ Dryer Stack

If a countertop is placed over the washer, at least a 1/4" gap must be left between the top of the machine and bottom of the countertop; nothing should be within 1/2" of any other side of the washing machine.

When the machine lid needs to be removed to reduce the height of the machine, a countertop kit* is necessary. The cover plate in the countertop kit replaces the machine lid and ensures electrical safety.

A filler frame* is recommenced at a

countertop height of 35 7/16" to 35 13/16" (90-91 cm)

Water intake, drain and electrical connections should be installed near the machine and be easily accessible.

An installation manual is supplied with the countertop kit.

(* available from your Miele dealer or Miele’s Technical Service Department).

Washer stand with drawer

A washer stand is available to raise the machine for convenience. It has a drawer to store cleaning essentials.

The stand can be purchased as an optional accessory.

The Miele washing machine can be installed as part of a washer-dryer stack in combination with a Miele tumble dryer. An appropriate "stacking kit" is required (part # 12 996 026).

(* available from your Miele dealer or Miele’s Technical Service Department.)

Note:

aSafety distance to the wall: minimum 13/16" (2 cm)

bHeight:

Stacking kit with pull out shelf 66 15/16" (170 cm)

Reinstallation of the machine lid

When reinstalling the machine lid, check the fit of the cover at the rear bracket to ensure safe transport.

44

Image 48
Contents Operating instructions Contents Contents Important Safety Instructions Guide to the washer Control panelBefore using for the first time Using the washer Prepare and sort the laundryGeneral tips Load the laundry Select a programProgram guide Temperatures Fabric Spin Laundry Care Speed Symbol Woolens Cold MedSilk HandwashSelect wash options if needed Select the temperature and spin speed Special spin options HoldNo spin Add detergent Too little detergent may causeToo much detergent may cause Detergent Normal soilingHeavy soiling Water hardness Water softenerFabric softener Starch Do not exceed the maximum level markSelect Delay Start if needed Cancelling Delay StartStart the program Activate the program lock if necessaryRemove the laundry Cancelling a program Making changes to the programInterrupting a program Adding/removing laundry during a wash program Drum door cannot be opened ifChild Safety Lock Locking the washerElectronic program lock Cleaning the washer Cleaning the detergent drawerClean the siphon tube Washer careCleaning the drain pump Washer care Quick Guide Remove this guide for easy referenceQuick Guide Sort the laundryLoad the laundry Select a programSelect the temperature and spin speed Select Delay Start if neededAdd detergent Start the programNormal Options Cleaning the water inlet filters Cleaning the inlet hose filterCleaning the filter in the inlet valve Frequently asked questions Wash program cannot be startedProgram was interrupted and a fault message appears General issues with the washer Poor wash results Door will not open when the Door button is pressed Opening the drum door during a power failure Remove the toolTechnical Service PC UpdateWarranty terms Optional accessoriesInstallation Instructions Help protect our environment Disposal of the packing materialDisposal of an appliance Installation Front viewBack view Installation site Installation Remove the shipping strutsDo not lift the washer by the drum door Installation Pull out the shipping strutInstalling the shipping struts Adjust the four leveling feet Level the washerInstallation beneath a counter Reinstallation of the machine lidWasher stand with drawer Optional accessory hose extension PlumbingWater connection Tips for a hot water connectionDrainage Electrical connection Grounding InstructionsPage Page Page Alterations rights reserved
Related manuals
Manual 56 pages 61.35 Kb