Miele W 1215 installation instructions Drainage

Page 53

Plumbing

Drainage

The 5 foot (1.5 m) drain hose may be connected as follows:

1.Directly into a sink: hook the hose over the edge of the sink and secure it firmly (e.g. by tying the hose to the water faucet).

2.To a stand pipe: place the drain hose into a 1 ½" (4 cm) stand pipe and secure it firmly.

3.To a floor drain: The machine is equipped with an air gap / anti-siphoning system so that no minimum drain height is required.

^The machine drains using a pump with a maximum delivery height of 4 feet (1.2 m).

^Make sure there are no kinks in the drain hose.

If desired, the drain hose may be extended to run a maximum of 16 feet (4.9 m), as long as the 4 foot (1.2 m) height is not exceeded. Hose extensions are available from your Miele dealer or Miele.

49

Image 53
Contents Operating and Installation Instructions Washer 1215 Contents Plumbing Important Safety Instructions Control panel Guide to the washerBefore using for the first time General tips Using the washerPrepare and sort the laundry Close the drum door Load the laundry Select a programProgram guide Cold Med Temperatures Fabric Spin Laundry Care Speed Symbol WoolensSilk HandwashSelect wash options if needed Select the temperature and spin speed No spin Special spin options HoldTo start the final spin To finish the programToo much detergent may cause Add detergentToo little detergent may cause Liquid detergent insert DetergentWater hardness DetergentWater softener Normal soilingFabric softener Do not exceed the maximum fill level Starch Fabric dyeCanceling Delay Start Select Delay Start if neededStart the program Activate the program lock if necessaryRemove the laundry Interrupting a program Canceling a programMaking changes to the program Drum door cannot be opened if Adding / removing laundry during a wash programLocking the washer Electronic program lock Child Safety LockCleaning the washer Cleaning and CareCleaning the drum Desclaing the washerCleaning the detergent drawer Open the access panel Cleaning the drain pump and lint trapRemove this guide for easy reference Quick GuideSort the laundry Quick GuideLoad the laundry Select a programSelect Delay Start if needed Select the temperature and spin speedAdd detergent Start the programNormal Options Cleaning and Care Cleaning the filter in the inlet valve Cleaning the water inlet filtersCleaning the inlet hose filter Changing the light bulb Wash program cannot be started Frequently asked questionsProgram was interrupted and a fault message appears General issues with the washer Poor wash results Door will not open when the Door button is pressed Open the lint trap door Opening the drum door during a power failurePC Update After sales serviceOptional accessories RepairsInstallation Instructions Disposal of an appliance Help protect our environmentDisposal of the packing material Front view InstallationBack view Installation Installation siteRemoving the shipping struts Do not lift the washer by the drum doorPull out the shipping strut InstallationInstalling the shipping struts Level the washer Adjust the four leveling feetInstallation beneath a counter Washer stand with drawer Washer / Dryer Stack Reinstallation of the machine lidPlumbing Hose extension optional accessoryTips for a hot water connection Water connectionDo not connect the washer to hot water only Drainage Electrical Instructions Electrical connection
Related manuals
Manual 56 pages 3.96 Kb