Miele T 8012 C, T 8013 C installation instructions Electrical connection

Page 31

Electrical connection

GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING – Improper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance! If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

The dryer comes with a 5 ft long, 12/4 AWG cord and a NEMA 14-30 P plug.

It should be connected to a 120/208-240 V, 30 A, 60 Hz AC power supply. A 3 pole-4 wire grounding power outlet (NEMA type 14-30 R) is necessary.

27

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Page Contents This dryer is intended for residential use only Important Safety InstructionsImportant Safety Instructions Control panel Program recommendations Before loading the dryerTurn on the dryer and load the laundry Using the dryerSelect a program Extra Dry Available drying options Gentle, Anti-creaseAnti-crease Select a drying option if neededTurbo GentleSelect the dryness level To adjust the buzzer volumeSelect the buzzer if desired At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programTo deactivate the child lock Child lockChild lock To activate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelEmptying the condensed water container Pull out the condenser Cleaning the condenserRemoving the condenser Turn the condenser lock upReturning the Condenser Rinsing the condenserQuick Guide Select a drying option if needed Quick GuideTurn on the dryer and load the laundry Select a programSelect the buzzer if desired Start the program Select the dryness levelAt the end of a program Normal Available drying options Turbo, Gentle, Anti-crease Program When to useChanging the light bulb What if the dryer will not run? Possible fault Fix Frequently asked questionsHow do I prevent static cling? What if the laundry is not dry enough? Possible fault MieleCare After sales servicePC Update RepairsInstallation Instructions Important Safety Instructions Disposal of the packing materials Caring for the environmentDisposal of an appliance Washer / Dryer Stack Height of a stacked installationElectrical connection Front view InstallationTransporting the dryer to the installation site Rear view Installation siteReinstallation of the machine lid Installation beneath a counterInstallation tips Level the dryer External water drain Installing the drain hoseConnection to a standpipe Draining the condensed water into a sinkExample Connection to a sink standpipe Installation requirements demanding a non-return valveConnector All rights reserved
Top Page Image Contents