Miele T 8013 C, T 8012 C Before loading the dryer, Program recommendations

Page 6

Before loading the dryer

The dryer must be correctly installed and connected before the first use. Please refer to the "Installation Instructions".

^Before using for the first time, clean the drum with a cloth.

Before drying, check fabric care labels for special drying instructions.

qDry with normal temperature r Dry with low temperature

(select "Gentle" option)

s Do not dry in a tumble dryer

Do not overload the drum! Overloading the dryer will result in poor drying results and wrinkling.

Knitted fabrics and flannel tend to shrink when washed and dried for the first time. Do not over dry these fabrics.

To prevent discoloration, do not dry new, dark-colored fabrics with light-colored items.

Close zippers and tie up fabric belts and apron ties to prevent tangles and damage to clothing.

Do not dry items that may melt or ignite in the dryer, such as plastics, rubber or sneakers.

Program recommendations

Normal

– Cottons and Permanent Press blends

Wrinkle-free

Permanent Press:

select the Hand Iron dryness level and reduce the load size for best drying results

Delicate fabrics, such as polyester: select the Gentle option to reduce creasing

Pure linen and down filled items

Woolens

– Wool and wool blends

Smooth

Linen

Permanent Press (cottons, blends and synthetics)

Sturdy

Durable Cottons and Permanent Press

Fluff / 20 min / 45 min

– All fabric types

6

Image 6
Contents Page Contents Important Safety Instructions This dryer is intended for residential use onlyImportant Safety Instructions Control panel Before loading the dryer Program recommendationsUsing the dryer Turn on the dryer and load the laundrySelect a program Available drying options Gentle, Anti-crease Extra DryGentle Select a drying option if neededTurbo Anti-creaseTo adjust the buzzer volume Select the dryness levelSelect the buzzer if desired Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programTo activate the child lock Child lockChild lock To deactivate the child lockCleaning the lint filter Dryer careCleaning the exterior and the control panel Cleaning the drumEmptying the condensed water container Turn the condenser lock up Cleaning the condenserRemoving the condenser Pull out the condenserRinsing the condenser Returning the CondenserQuick Guide Select a program Quick GuideTurn on the dryer and load the laundry Select a drying option if neededSelect the dryness level Select the buzzer if desired Start the programAt the end of a program Program When to use Normal Available drying options Turbo, Gentle, Anti-creaseChanging the light bulb Frequently asked questions What if the dryer will not run? Possible fault FixHow do I prevent static cling? What if the laundry is not dry enough? Possible fault Repairs After sales servicePC Update MieleCareInstallation Instructions Important Safety Instructions Caring for the environment Disposal of the packing materialsDisposal of an appliance Height of a stacked installation Washer / Dryer StackElectrical connection Installation Front viewRear view Installation site Transporting the dryer to the installation siteInstallation beneath a counter Reinstallation of the machine lidInstallation tips Level the dryer Installing the drain hose External water drainDraining the condensed water into a sink Connection to a standpipeInstallation requirements demanding a non-return valve Example Connection to a sink standpipeConnector All rights reserved