Miele T 8012 C Cleaning the condenser, Removing the condenser, Turn the condenser lock up

Page 17

Dryer care

Cleaning the condenser

,To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance.

^Clean the condenser every 6 months and when the "Filter/Vent" indicator lights. Clean approximately every 100 uses when the dryer is used often.

Removing the condenser

The access panel to the condenser is located on the lower left corner of the dryer.

^Open the access panel with the supplied yellow tool.

^Remove the panel up and out of the condenser access area.

^Turn the condenser door lock down and remove the door up and out.

^ Turn the condenser lock up.

^ Pull out the condenser.

17

Image 17
Contents Page Contents This dryer is intended for residential use only Important Safety InstructionsImportant Safety Instructions Control panel Program recommendations Before loading the dryerSelect a program Using the dryerTurn on the dryer and load the laundry Extra Dry Available drying options Gentle, Anti-creaseTurbo Select a drying option if neededGentle Anti-creaseSelect the buzzer if desired To adjust the buzzer volumeSelect the dryness level At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programChild lock Child lockTo activate the child lock To deactivate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelEmptying the condensed water container Removing the condenser Cleaning the condenserTurn the condenser lock up Pull out the condenserReturning the Condenser Rinsing the condenserQuick Guide Turn on the dryer and load the laundry Quick GuideSelect a program Select a drying option if neededAt the end of a program Select the dryness levelSelect the buzzer if desired Start the program Normal Available drying options Turbo, Gentle, Anti-crease Program When to useChanging the light bulb How do I prevent static cling? Frequently asked questionsWhat if the dryer will not run? Possible fault Fix What if the laundry is not dry enough? Possible fault PC Update After sales serviceRepairs MieleCareInstallation Instructions Important Safety Instructions Disposal of an appliance Caring for the environmentDisposal of the packing materials Washer / Dryer Stack Height of a stacked installationElectrical connection Front view InstallationTransporting the dryer to the installation site Rear view Installation siteReinstallation of the machine lid Installation beneath a counterInstallation tips Level the dryer External water drain Installing the drain hoseConnection to a standpipe Draining the condensed water into a sinkExample Connection to a sink standpipe Installation requirements demanding a non-return valveConnector All rights reserved