Miele T 8012 C, T 8013 C installation instructions Connector

Page 39

Installation

1 Connector

2Sink connecting nut

3Hose clamp

4Hose end

5Non-return valve

6Dryer drain hose

^Install the connector 1 with the sink connecting nut 2 to the sink standpipe.

Usually the sink connection nut is equipped with a washer. Please remove the washer.

^Plug the hose end 4 to the connector 1.

^Using a screwdriver tighten the hose clamp 3 directly behind the sink connecting nut.

,Install the non-return valve 5 vertical or slightly angled. If installed horizontal it will not operate correctly.

^Connect the non-return valve 5 to the dryer drain hose 6. See illustration for the correct direction.

^Fasten the non-return valve with the hose clamps.

35

Image 39

Contents Page Contents This dryer is intended for residential use only Important Safety InstructionsImportant Safety Instructions Control panel Program recommendations Before loading the dryerUsing the dryer Turn on the dryer and load the laundrySelect a program Extra Dry Available drying options Gentle, Anti-creaseAnti-crease Select a drying option if neededTurbo GentleTo adjust the buzzer volume Select the dryness levelSelect the buzzer if desired At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programTo deactivate the child lock Child lockChild lock To activate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelEmptying the condensed water container Pull out the condenser Cleaning the condenserRemoving the condenser Turn the condenser lock upReturning the Condenser Rinsing the condenserQuick Guide Select a drying option if needed Quick GuideTurn on the dryer and load the laundry Select a programSelect the dryness level Select the buzzer if desired Start the programAt the end of a program Normal Available drying options Turbo, Gentle, Anti-crease Program When to useChanging the light bulb Frequently asked questions What if the dryer will not run? Possible fault FixHow do I prevent static cling? What if the laundry is not dry enough? Possible fault MieleCare After sales servicePC Update RepairsInstallation Instructions Important Safety Instructions Caring for the environment Disposal of the packing materialsDisposal of an appliance Washer / Dryer Stack Height of a stacked installationElectrical connection Front view InstallationTransporting the dryer to the installation site Rear view Installation siteReinstallation of the machine lid Installation beneath a counterInstallation tips Level the dryer External water drain Installing the drain hoseConnection to a standpipe Draining the condensed water into a sinkExample Connection to a sink standpipe Installation requirements demanding a non-return valveConnector All rights reserved