Miele T 8013 C, T 8012 C Installation beneath a counter, Reinstallation of the machine lid

Page 34

Installation

Installation beneath a counter

,When the machine lid needs to be removed to reduce the height of the machine, a built-under spacer kit* is necessary.

It must be installed by a Miele Service Technician.

The cover plate of the built-under kit replaces the appliance lid and ensures electrical safety.

An installation manual is supplied with the built-under spacer kit.

The electrical connection should be near the dryer and accessible at all times.

Extended machine feet* are recommended at a built-in height of more than 33 1/16" (840 mm).

^Set the extended machine feet on a height of 1 9/16" (40 mm).

Remove the original machine feet and replace them with the extended ones.

One or two filler frames* are

recommended at a niche height of 34 1/4" / 34 13/16" to 36" / 36 5/8" (870/885 - 915/930 mm).

* (optional accessory)

An existing continuous toe kick must be interrupted at the dryer location!

Reinstallation of the machine lid

When reinstalling the appliance lid, check the firm fit of the cover at the rear bracket for a safe transport of the dryer.

30

Image 34

Contents Page Contents Important Safety Instructions This dryer is intended for residential use onlyImportant Safety Instructions Control panel Before loading the dryer Program recommendationsTurn on the dryer and load the laundry Using the dryerSelect a program Available drying options Gentle, Anti-crease Extra DryGentle Select a drying option if neededTurbo Anti-creaseSelect the dryness level To adjust the buzzer volumeSelect the buzzer if desired Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programTo activate the child lock Child lockChild lock To deactivate the child lockCleaning the lint filter Dryer careCleaning the exterior and the control panel Cleaning the drumEmptying the condensed water container Turn the condenser lock up Cleaning the condenserRemoving the condenser Pull out the condenserRinsing the condenser Returning the CondenserQuick Guide Select a program Quick GuideTurn on the dryer and load the laundry Select a drying option if neededSelect the buzzer if desired Start the program Select the dryness levelAt the end of a program Program When to use Normal Available drying options Turbo, Gentle, Anti-creaseChanging the light bulb What if the dryer will not run? Possible fault Fix Frequently asked questionsHow do I prevent static cling? What if the laundry is not dry enough? Possible fault Repairs After sales servicePC Update MieleCareInstallation Instructions Important Safety Instructions Disposal of the packing materials Caring for the environmentDisposal of an appliance Height of a stacked installation Washer / Dryer StackElectrical connection Installation Front viewRear view Installation site Transporting the dryer to the installation siteInstallation beneath a counter Reinstallation of the machine lidInstallation tips Level the dryer Installing the drain hose External water drainDraining the condensed water into a sink Connection to a standpipeInstallation requirements demanding a non-return valve Example Connection to a sink standpipeConnector All rights reserved