Miele T 1312, T 1313 Cleaning the exterior and the control panel, Cleaning the drum

Page 15

Dryer care

Cleaning the exterior and the control panel

,To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance.

Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the dryer. They will damage the surface.

^The exterior and the control panel can be cleaned with warm water and liquid dish soap applied with a soft sponge.

^Wipe dry.

Cleaning the drum

^The stainless steel surfaces of the drum can be cleaned using a non-abrasive stainless steel cleaner.

^Wipe clean with a soft cloth.

15

Image 15

Contents Operating Instructions Vented Dryer 1312 1313 Contents This dryer is intended for residential use only Important Safety InstructionsImportant Safety Instructions Control panel Program recommendations Before loading the dryerUsing the dryer Turn on the dryer and load the laundrySelect a program Extra Dry Program When to useGentle Select a drying option if neededTurbo Full loadAdjusting the buzzer volume Select the dryness levelSelect the buzzer if desired At the end of a program Start the program Adding or removing laundry during a program Canceling or changing a programTo deactivate the child lock Child lockChild lock To activate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelChanging the light bulb What if the drum light does not come on? What if the Filter/Vent fault indicator is lit?What if the dryer will not run? How do I prevent static cling?What if water has collected around the drum opening? Frequently asked questionsWhat if the program runs too long or stops? What if the laundry is not dry enough?Quick Guide Select a drying option if needed Quick GuideTurn on the dryer and load the laundry Select a programSelect the dryness level Select the buzzer if desired Start the programAt the end of a program For uniform loads, e.g. sheets Underwear, socks PC Update Technical ServicePage Installation Instructions Important Safety Instructions Caring for the environment Disposal of the packing materialsDisposal of an appliance Washer / Dryer Stack Height of vent adapter in a stacked installationElectrical connection Easy Installation KITInstallation Leveling the dryer InstallationChanging the position of the exhaust connection Determining the position of the exhaust connectionAdapter Installation tipsWall connection with rigid pipe Exhaust connection with aFlexible exhaust hose or rigid Pipe Window connectionDryer top view Direct wall connectionTips about the ductwork How to calculate the effective duct lengthWall vent or window vent Smooth metal ductElbow 90 sharp Concertina bendTotal duct length Page All rights reserved