Miele T 1312, T 1313 operating instructions Electrical connection, Easy Installation KIT

Page 29

Electrical connection

GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING – Improper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative or personnel if you are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance! If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

The dryer comes with a 5 ft long, 12/4 AWG cord and a NEMA 14-30 P plug.

It should be connected to a 120/208-240 V, 15 A, 60 Hz AC power supply. A 3 pole-4 wire grounding power outlet (NEMA type 14-30 R) is necessary.

EASY INSTALLATION KIT

If you do not have a dedicated 15 Amp line for this appliance, but you have the standard, 120/208-240 V - 30 Amp,

60 Hz AC outlet, you can use the "Easy Installation Kit", which allows you to use that line to connect the dryer to power.

057B for on-site outlet NEMA 10-30 R 060B for on-site outlet NEMA 14-30 R

For more information on the "Easy Installation Kit" or if you have questions concerning the electrical connection, please contact:

U1-800-999-1360 techserv@mieleusa.com

V1-800-565-6435 service@miele.ca

25

Image 29

Contents Operating Instructions Vented Dryer 1312 1313 Contents This dryer is intended for residential use only Important Safety InstructionsImportant Safety Instructions Control panel Program recommendations Before loading the dryerSelect a program Using the dryerTurn on the dryer and load the laundry Extra Dry Program When to useTurbo Select a drying option if neededFull load GentleSelect the buzzer if desired Adjusting the buzzer volumeSelect the dryness level At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programChild lock Child lockTo activate the child lock To deactivate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelChanging the light bulb What if the dryer will not run? What if the Filter/Vent fault indicator is lit?How do I prevent static cling? What if the drum light does not come on?What if the program runs too long or stops? Frequently asked questionsWhat if the laundry is not dry enough? What if water has collected around the drum opening?Quick Guide Turn on the dryer and load the laundry Quick GuideSelect a program Select a drying option if neededAt the end of a program Select the dryness levelSelect the buzzer if desired Start the program For uniform loads, e.g. sheets Underwear, socks PC Update Technical ServicePage Installation Instructions Important Safety Instructions Disposal of an appliance Caring for the environmentDisposal of the packing materials Washer / Dryer Stack Height of vent adapter in a stacked installationElectrical connection Easy Installation KITInstallation Leveling the dryer InstallationChanging the position of the exhaust connection Determining the position of the exhaust connectionAdapter Installation tipsFlexible exhaust hose or rigid Pipe Exhaust connection with aWindow connection Wall connection with rigid pipeDryer top view Direct wall connectionTips about the ductwork How to calculate the effective duct lengthElbow 90 sharp Smooth metal ductConcertina bend Wall vent or window ventTotal duct length Page All rights reserved