Miele T 1312, T 1313 operating instructions Installation tips, Adapter

Page 33

Installation

Installation tips

An airflow gap of 3/8" (10 mm) must be provided between the machine and the floor. This airflow gap must not be blocked by a toekick or thick piled carpets.

Do not install the dryer next to a refrigerator. The warm air exhausting from the dryer can affect the thermostat of the refrigerator, causing it to run continuously.

Adapter

A ring adapter is supplied with the machine, and is compatible with all venting systems. The adapter helps prevent heat from escaping, and heats the air in the drum faster.

^The adapter, 1, is inserted into the connector, 2.

Using the adapter with a maximum duct length of 33 ft (10 m) will result in shorter drying times and energy savings.

29

Image 33

Contents Operating Instructions Vented Dryer 1312 1313 Contents This dryer is intended for residential use only Important Safety InstructionsImportant Safety Instructions Control panel Program recommendations Before loading the dryerUsing the dryer Turn on the dryer and load the laundrySelect a program Extra Dry Program When to useTurbo Select a drying option if neededFull load GentleAdjusting the buzzer volume Select the dryness levelSelect the buzzer if desired At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programChild lock Child lockTo activate the child lock To deactivate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelChanging the light bulb What if the dryer will not run? What if the Filter/Vent fault indicator is lit?How do I prevent static cling? What if the drum light does not come on?What if the program runs too long or stops? Frequently asked questionsWhat if the laundry is not dry enough? What if water has collected around the drum opening?Quick Guide Turn on the dryer and load the laundry Quick GuideSelect a program Select a drying option if neededSelect the dryness level Select the buzzer if desired Start the programAt the end of a program For uniform loads, e.g. sheets Underwear, socks PC Update Technical ServicePage Installation Instructions Important Safety Instructions Caring for the environment Disposal of the packing materialsDisposal of an appliance Washer / Dryer Stack Height of vent adapter in a stacked installationElectrical connection Easy Installation KITInstallation Leveling the dryer InstallationChanging the position of the exhaust connection Determining the position of the exhaust connectionAdapter Installation tipsFlexible exhaust hose or rigid Pipe Exhaust connection with aWindow connection Wall connection with rigid pipeDryer top view Direct wall connectionTips about the ductwork How to calculate the effective duct lengthElbow 90 sharp Smooth metal ductConcertina bend Wall vent or window ventTotal duct length Page All rights reserved