Miele T 1313, T 1312 operating instructions Before loading the dryer, Program recommendations

Page 6

Before loading the dryer

The dryer must be correctly installed and connected before the first use. Please refer to the "Installation Instructions".

^Before using for the first time clean the drum with a cloth.

Before drying, check fabric care labels for special drying instructions.

qDry with normal temperature r Dry with low temperature

(select "Gentle" option)

s Do not dry in a tumble dryer

Do not overload the drum! Overloading the dryer will result in poor drying results and wrinkling.

Knitted fabrics and flannel tend to shrink when washed and dried for the first time. Do not overdry these fabrics.

To prevent discoloration, do not dry new, dark-colored fabrics with light-colored items.

Close zippers and tie up fabric belts and apron ties to prevent tangles and damage to clothing.

Do not dry items that may melt or ignite in the dryer, such as plastics, rubber or sneakers.

Program recommendations

Normal

– Cottons and Permanent Press blends

Wrinkle-free

Permanent Press:

select the Hand Iron dryness and reduce the load size for best drying results

Delicate fabrics, such as polyester: select the Gentle option to reduce creasing

Pure linen and down filled items

Woolens

– Wool and wool blends

Smooth

Linen

Permanent Press (cottons, blends and synthetics)

Sturdy

Durable Cottons and Permanent Press

Fluff / 20 min / 30 min

– All fabric types

6

Image 6
Contents Operating Instructions Vented Dryer 1312 1313 Contents Important Safety Instructions This dryer is intended for residential use onlyImportant Safety Instructions Control panel Before loading the dryer Program recommendationsUsing the dryer Turn on the dryer and load the laundrySelect a program Program When to use Extra DryFull load Select a drying option if neededTurbo GentleAdjusting the buzzer volume Select the dryness levelSelect the buzzer if desired Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programTo activate the child lock Child lockChild lock To deactivate the child lockCleaning the lint filter Dryer careCleaning the exterior and the control panel Cleaning the drumChanging the light bulb How do I prevent static cling? What if the Filter/Vent fault indicator is lit?What if the dryer will not run? What if the drum light does not come on?What if the laundry is not dry enough? Frequently asked questionsWhat if the program runs too long or stops? What if water has collected around the drum opening?Quick Guide Select a program Quick GuideTurn on the dryer and load the laundry Select a drying option if neededSelect the dryness level Select the buzzer if desired Start the programAt the end of a program For uniform loads, e.g. sheets Underwear, socks Technical Service PC UpdatePage Installation Instructions Important Safety Instructions Caring for the environment Disposal of the packing materialsDisposal of an appliance Height of vent adapter in a stacked installation Washer / Dryer StackEasy Installation KIT Electrical connectionInstallation Installation Leveling the dryerDetermining the position of the exhaust connection Changing the position of the exhaust connectionInstallation tips AdapterWindow connection Exhaust connection with aFlexible exhaust hose or rigid Pipe Wall connection with rigid pipeDirect wall connection Dryer top viewHow to calculate the effective duct length Tips about the ductworkConcertina bend Smooth metal ductElbow 90 sharp Wall vent or window ventTotal duct length Page All rights reserved