Installation
Determining the position of the exhaust connection
The exhaust connection can be left at the rear of the dryer (factory standard) or moved to the left or right side of the dryer.
Changing the position of the exhaust connection
^Remove the exhaust connection cover on the left or right side of the dryer.
^Do this by inserting a screwdriver into each raised flap and lifting upwards, as shown.
This cover is no longer needed.
^Press the supplied cover firmly into the rear opening.
^To remove the cap insert a screwdriver between the machine and the cap and lift upwards, the cap will then pop out of place.
28