Miele T7944C Changing the programme sequence, Once a programme has started, Altering Delay start

Page 24

Changing the programme sequence

Once a programme has started

- changing the programme

You cannot change to another programme once a programme has started (this prevents unintentional alterations).

You will need to cancel the current programme before you can select a new one.

-cancelling the programme and then selecting a different programme

Press the Start/Stop button.

The items will be cooled down, depending on the temperature reached and how long they have been dried for.

If you press the Start/Stop button again during the cooling down phase, Finish will light up in the display.

Press the Door button.

Close the door.

Select another programme and start it.

-cancelling the programme and then removing the laundry

Proceed as described in "Adding or removing laundry after a programme has started" below.

Switch the dryer off after closing the door.

Altering Delay start

See "Delay start".

Adding or removing laundry after a programme has started

Press the Door button.

Open the door.

Danger of burning:

Do not touch the back of the drum when adding or removing items. The drum and the items can get very hot.

Add or remove items as required.

Close the door.

Press the Start/Stop button.

Time remaining

The time left shown in the display may now vary from the actual drying time.

24

Image 24

Contents Operating instructions For condenser tumble dryer T 7944 C Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Operating the tumble dryer Control panelProgramme duration / Estimated time remaining Display showsFollowing are also selected via the display Garment care label symbols Tips on dryingDrying IroningHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerSelect any Extra options / Delay start Select a programmeDrying level programmes TipRemove the laundry when the programme has finished Start the programmeBefore the end of a programme Extra options / Delay start Delay startExtra options Cottons Max. load 7 kg Extra dry, Normal Hand iron, Machine ironMinimum iron Max. load 3.5 kg Normal, Hand iron Delicates Max. load 2.5 kg Normal, Hand ironProgramme chart Woollens handcare Max. load 2 kgAutomatic plus Max. load 5 kg Normal, Hand iron Denim Max. load 3 kg Normal, Hand ironCool air Max. load 7 kg Warm air Max. load 7 kgGentle smoothing Max. load 1 kg Altering Delay start Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedElectronic system lock To activate the lockTo deactivate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesProblem Possible cause Remedy Airways indicatorTo switch off this To switch off this warningProblem Possible cause Remedy Start/Stop button is Programme indicatorFlashing slowly Display is darkAn unsatisfactory drying result Other problems Problem Possible cause Remedy Drying processEven switches off Goes on too long orProblem Possible cause Remedy Water leaks from Been cleanedPower cut Dryer afterChanging the lamp After Sales service Future updates PCAppliance guarantee Optional accessoriesInstallation and connection Front viewRear view Installation site Transporting the machine to its installation siteWasher-dryer stack Before moving the tumble dryer again e.g. when moving house Levelling the machineRoom ventilation External condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation and connection Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Woollens handcareTechnical data To check the setting Programmable functionsReduced residual moisture. Laundry drier Programmable functions Hours anti-crease factory default setting Anti-creaseAnti-crease off Hour anti-crease Altering the volume of the buzzer Normal buzzer Factory default setting Loud buzzerReduced residual moisture. Laundry drier Extending the cooling down time Cooling down time extended by ten minutesFactory default. Not in current programme StandbyOff Follow the steps ,, ... to programme and store in memoryFactory default setting. Not in current programme Memory deactivated factory default setting Memory activated Memory functionClean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Factory default setting Adjusted for very soft waterExtending the range of the drying levels Page Alteration rights reserved/0113 Nr 851 060