Miele T7944C operating instructions An unsatisfactory drying result

Page 36

Problem solving guide

An unsatisfactory drying result

Problem	Possible cause	Remedy
The laundry is not	The load consisted of	– Finish drying using the
sufficiently dry.	different fabrics.	Warm air programme.
		– Select a different
		programme next time *.
Items made of synthetic	Synthetic fibres tend to	Static charge can be
fibres are charged with	attract static charge.	reduced by adding a
static electricity after		fabric conditioner to the
drying.		final rinse in the washing
		programme or a fabric
		conditioner sheet to the
		load when drying.
There is a build-up of	Fluff is principally the	Fluff is collected by the
fluff.	result of friction when	fluff filters and can be
	garments are being worn	removed easily (see
	and to some extent when	"Cleaning and care").
	they are being washed.
	Machine drying does not
	affect the lifetime of the
	fabric.

*You can alter the drying levels for some programmes (see "Programmable functions" at the the end of this booklet).

36

Image 36

Contents Operating instructions For condenser tumble dryer T 7944 C Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Operating the tumble dryer Control panelProgramme duration / Estimated time remaining Display showsFollowing are also selected via the display Garment care label symbols Tips on dryingDrying IroningHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerSelect any Extra options / Delay start Select a programmeDrying level programmes TipRemove the laundry when the programme has finished Start the programmeBefore the end of a programme Extra options / Delay start Delay startExtra options Cottons Max. load 7 kg Extra dry, Normal Hand iron, Machine ironMinimum iron Max. load 3.5 kg Normal, Hand iron Delicates Max. load 2.5 kg Normal, Hand ironProgramme chart Woollens handcare Max. load 2 kgAutomatic plus Max. load 5 kg Normal, Hand iron Denim Max. load 3 kg Normal, Hand ironCool air Max. load 7 kg Warm air Max. load 7 kgGentle smoothing Max. load 1 kg Altering Delay start Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedElectronic system lock To activate the lockTo deactivate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesProblem Possible cause Remedy Airways indicatorTo switch off this To switch off this warningProblem Possible cause Remedy Start/Stop button is Programme indicatorFlashing slowly Display is darkAn unsatisfactory drying result Other problems Problem Possible cause Remedy Drying processEven switches off Goes on too long orProblem Possible cause Remedy Water leaks from Been cleanedPower cut Dryer afterChanging the lamp After Sales service Future updates PCAppliance guarantee Optional accessoriesInstallation and connection Front viewRear view Installation site Transporting the machine to its installation siteWasher-dryer stack Before moving the tumble dryer again e.g. when moving house Levelling the machineRoom ventilation External condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation and connection Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Woollens handcareTechnical data To check the setting Programmable functionsReduced residual moisture. Laundry drier Programmable functions Hours anti-crease factory default setting Anti-creaseAnti-crease off Hour anti-crease Altering the volume of the buzzer Normal buzzer Factory default setting Loud buzzerReduced residual moisture. Laundry drier Extending the cooling down time Cooling down time extended by ten minutesFactory default. Not in current programme StandbyOff Follow the steps ,, ... to programme and store in memoryFactory default setting. Not in current programme Memory deactivated factory default setting Memory activated Memory functionClean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Factory default setting Adjusted for very soft waterExtending the range of the drying levels Page Alteration rights reserved/0113 Nr 851 060