Miele T7944C Anti-crease off Hour anti-crease, Hours anti-crease factory default setting

Page 52

Programmable functions

Anti-crease

Anti-crease helps prevent creasing, if laundry is not normally removed im- mediately after the end of a programme.

The anti-crease function

–is activated when the tumble dryer is delivered. You can shorten the duration of the anti-crease phase or deactivate it if wished.

–is used in all programmes except Woollens handcare.

–should be left activated.

Follow the steps (,, ...) to programme and store in memory.

Before you begin, ensure that:

–The tumble dryer is switched off.

–The door is closed.

Press the Start/Stop button and keep it pressed in whilst carrying out steps

-.

Switch the dryer on.

Wait until the Start/Stop button lights up constantly . . .

. . . and then release the Start/Stop button.

Press the Low temperature button twice.

–The Low temperature indicator light will flash 3 times briefly.

A number to show which option is selected will appear in the display alternating with the letter P.

0Anti-crease off

i1 hour anti-crease

(the Automatic plus indicator light will also flash once).

22 hours anti-crease (factory default setting)

(the Automatic plus indicator light will also flash twice).

Pressing the Start/Stop button switches between the options.

Switch the dryer off.

The setting you have selected is now stored in memory. You can change it again at any time.

To check the setting:

Carry out steps to .

Switch the dryer off after step .

52

Image 52

Contents Operating instructions For condenser tumble dryer T 7944 C Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Operating the tumble dryer Control panelDisplay shows Programme duration / Estimated time remainingFollowing are also selected via the display Garment care label symbols Tips on dryingDrying IroningHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerSelect any Extra options / Delay start Select a programmeDrying level programmes TipStart the programme Remove the laundry when the programme has finishedBefore the end of a programme Delay start Extra options / Delay startExtra options Cottons Max. load 7 kg Extra dry, Normal Hand iron, Machine ironMinimum iron Max. load 3.5 kg Normal, Hand iron Delicates Max. load 2.5 kg Normal, Hand ironProgramme chart Woollens handcare Max. load 2 kgAutomatic plus Max. load 5 kg Normal, Hand iron Denim Max. load 3 kg Normal, Hand ironWarm air Max. load 7 kg Cool air Max. load 7 kgGentle smoothing Max. load 1 kg Altering Delay start Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedTo activate the lock Electronic system lockTo deactivate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesProblem Possible cause Remedy Airways indicatorTo switch off this To switch off this warningProblem Possible cause Remedy Start/Stop button is Programme indicatorFlashing slowly Display is darkAn unsatisfactory drying result Other problems Problem Possible cause Remedy Drying processEven switches off Goes on too long orProblem Possible cause Remedy Water leaks from Been cleanedPower cut Dryer afterChanging the lamp After Sales service Future updates PCAppliance guarantee Optional accessoriesInstallation and connection Front viewTransporting the machine to its installation site Rear view Installation siteWasher-dryer stack Levelling the machine Before moving the tumble dryer again e.g. when moving houseRoom ventilation General notes External condensed water outletArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation and connection Electrical connection Non-rewireable plugs BSElectrical connection U.K Consumption data Woollens handcareTechnical data Programmable functions To check the settingReduced residual moisture. Laundry drier Programmable functions Anti-crease Hours anti-crease factory default settingAnti-crease off Hour anti-crease Altering the volume of the buzzer Normal buzzer Factory default setting Loud buzzerReduced residual moisture. Laundry drier Extending the cooling down time Cooling down time extended by ten minutesFactory default. Not in current programme StandbyOff Follow the steps ,, ... to programme and store in memoryFactory default setting. Not in current programme Memory deactivated factory default setting Memory activated Memory functionClean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Factory default setting Adjusted for very soft waterExtending the range of the drying levels Page Alteration rights reserved/0113 Nr 851 060