Miele T7944C operating instructions Changing the lamp

Page 39

Problem solving guide

Changing the lamp

Disconnect the tumble dryer from the mains electricity supply.

Open the door.

You will find the interior light cover at the top of the drum aperture.

Insert a suitable tool, such as a wide bladed screwdriver, under the side edge of the light cover as illustrated.

Apply a little pressure and whilst doing so turn your wrist in the direction of the arrow to open the cover.

The cover will open downwards.

The temperature resistant lamp should only be ordered from your Miele Dealer or the Miele Spare Parts Department.

The light specification and maximum wattage is stated on the data plate and on the light cover.

Turn the light anti-clockwise to remove.

Replace the lamp.

To close the cover push it upwards and press it on the left and right until you hear it click into position.

Ensure that it is fitted into position securely, as any moisture could cause a short circuit.

39

Image 39

Contents Operating instructions For condenser tumble dryer T 7944 C Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Control panel Operating the tumble dryerProgramme duration / Estimated time remaining Display showsFollowing are also selected via the display Ironing Garment care label symbolsTips on drying DryingTurn on the tumble dryer How to dry correctlyBrief instructions Sort the laundryTip Select any Extra options / Delay startSelect a programme Drying level programmesRemove the laundry when the programme has finished Start the programmeBefore the end of a programme Extra options / Delay start Delay startExtra options Delicates Max. load 2.5 kg Normal, Hand iron Cottons Max. load 7 kg Extra dry, NormalHand iron, Machine iron Minimum iron Max. load 3.5 kg Normal, Hand ironDenim Max. load 3 kg Normal, Hand iron Programme chartWoollens handcare Max. load 2 kg Automatic plus Max. load 5 kg Normal, Hand ironCool air Max. load 7 kg Warm air Max. load 7 kgGentle smoothing Max. load 1 kg Adding or removing laundry after a programme has started Altering Delay startChanging the programme sequence Once a programme has startedElectronic system lock To activate the lockTo deactivate the lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guideTo switch off this warning Problem Possible cause RemedyAirways indicator To switch off thisDisplay is dark Problem Possible cause Remedy Start/Stop button isProgramme indicator Flashing slowlyAn unsatisfactory drying result Goes on too long or Other problemsProblem Possible cause Remedy Drying process Even switches offDryer after Problem Possible cause Remedy Water leaks fromBeen cleaned Power cutChanging the lamp Optional accessories After Sales serviceFuture updates PC Appliance guaranteeFront view Installation and connectionRear view Installation site Transporting the machine to its installation siteWasher-dryer stack Before moving the tumble dryer again e.g. when moving house Levelling the machineRoom ventilation External condensed water outlet General notesArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation and connection Non-rewireable plugs BS Electrical connectionElectrical connection U.K Woollens handcare Consumption dataTechnical data To check the setting Programmable functionsReduced residual moisture. Laundry drier Programmable functions Hours anti-crease factory default setting Anti-creaseAnti-crease off Hour anti-crease Normal buzzer Factory default setting Loud buzzer Altering the volume of the buzzerReduced residual moisture. Laundry drier Cooling down time extended by ten minutes Extending the cooling down timeFollow the steps ,, ... to programme and store in memory Factory default. Not in current programmeStandby OffFactory default setting. Not in current programme Memory function Memory deactivated factory default setting Memory activatedClean out airways indicator Keypad tone Factory default setting Adjusted for very soft water Adjusting the dryers electronics for very soft waterExtending the range of the drying levels Page Alteration rights reserved/0113 Nr 851 060