Miele T7944C Problem Possible cause Remedy Water leaks from, Dryer after, Condenser unit has

Page 38

Problem solving guide

Problem

Possible cause

Remedy

Water leaks from the

– The inner cover of the

Ensure that the

dryer after the

condenser unit has not

 

condenser unit is

condenser unit has

been locked properly

 

positioned correctly

been cleaned.

and/or the condenser

 

and lock the inner

 

unit has not been

 

cover.

 

positioned correctly.

Check the rubber

 

– Fluff has collected in

 

seals.

 

the condenser unit

Use a cloth to remove

 

housing.

 

any visible fluff from the

 

 

 

inside of the condenser

 

 

 

unit housing.

The programme does

No obvious cause.

Is the dryer switched

not start.

 

 

on?

 

 

Is the plug correctly

 

 

 

inserted into the socket

 

 

 

and switched on?

 

 

Is the door closed

 

 

 

properly?

 

 

Has the fuse or circuit

 

 

 

breaker tripped?

Power cut.

A programme which was running previously will

 

continue automatically when power is restored to the

 

tumble dryer as long as the Cooling down phase had

 

not been reached.

 

 

The interior drum

The lighting switches off

Switch the dryer off

lighting does not come

automatically (to save

 

and then on again.

on.

energy).

If the lamp needs to be

 

 

 

replaced, follow the

 

 

 

instructions in

 

 

 

"Changing the lamp".

38

Image 38
Contents Operating instructions For condenser tumble dryer T 7944 C Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Contents Consumption data Technical data Correct application Safety with children Technical safety Page Correct use Page Page Accessories Operating the tumble dryer Control panelFollowing are also selected via the display Programme duration / Estimated time remainingDisplay shows Drying Garment care label symbolsTips on drying IroningSort the laundry How to dry correctlyBrief instructions Turn on the tumble dryerDrying level programmes Select any Extra options / Delay startSelect a programme TipBefore the end of a programme Remove the laundry when the programme has finishedStart the programme Extra options Extra options / Delay startDelay start Minimum iron Max. load 3.5 kg Normal, Hand iron Cottons Max. load 7 kg Extra dry, NormalHand iron, Machine iron Delicates Max. load 2.5 kg Normal, Hand ironAutomatic plus Max. load 5 kg Normal, Hand iron Programme chartWoollens handcare Max. load 2 kg Denim Max. load 3 kg Normal, Hand ironGentle smoothing Max. load 1 kg Cool air Max. load 7 kgWarm air Max. load 7 kg Once a programme has started Altering Delay startChanging the programme sequence Adding or removing laundry after a programme has startedTo deactivate the lock Electronic system lockTo activate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesTo switch off this Problem Possible cause RemedyAirways indicator To switch off this warningFlashing slowly Problem Possible cause Remedy Start/Stop button isProgramme indicator Display is darkAn unsatisfactory drying result Even switches off Other problemsProblem Possible cause Remedy Drying process Goes on too long orPower cut Problem Possible cause Remedy Water leaks fromBeen cleaned Dryer afterChanging the lamp Appliance guarantee After Sales serviceFuture updates PC Optional accessoriesInstallation and connection Front viewWasher-dryer stack Rear view Installation siteTransporting the machine to its installation site Room ventilation Before moving the tumble dryer again e.g. when moving houseLevelling the machine Arranging the drain hose External condensed water outletGeneral notes Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation and connection Electrical connection U.K Non-rewireable plugs BSElectrical connection Consumption data Woollens handcareTechnical data Reduced residual moisture. Laundry drier To check the settingProgrammable functions Programmable functions Anti-crease off Hour anti-crease Hours anti-crease factory default settingAnti-crease Altering the volume of the buzzer Normal buzzer Factory default setting Loud buzzerReduced residual moisture. Laundry drier Extending the cooling down time Cooling down time extended by ten minutesOff Factory default. Not in current programmeStandby Follow the steps ,, ... to programme and store in memoryFactory default setting. Not in current programme Memory deactivated factory default setting Memory activated Memory functionClean out airways indicator Keypad tone Adjusting the dryers electronics for very soft water Factory default setting Adjusted for very soft waterExtending the range of the drying levels Page Alteration rights reserved/0113 Nr 851 060